| auszookers.com https://auszookers.com/forum/ |
|
| How much does a stock 1.3 LWB weigh? https://auszookers.com/forum/viewtopic.php?f=5&t=5297 |
Page 1 of 1 |
| Author: | want33s [ Sun Jun 21, 2009 2:31 pm ] |
| Post subject: | How much does a stock 1.3 LWB weigh? |
How much does a stock 1.3 WT LWB weigh? I don't have ready access to a weigh bridge and I want to try my G-tech performance meter out.. It is an accelerometer that mounts to windscreen and tells you: 0-60m/h 1/4 mile time and speed Cornering G's 60-0 braking distance Horsepower.. All you need to do is tell it how much the car weighs and then go testing. I want to compare old 1.3 to new 1.3/1.6 hybrid I've put together. |
|
| Author: | shep [ Sun Jun 21, 2009 2:37 pm ] |
| Post subject: | Re: How much does a stock 1.3 LWB weigh? |
my stock hard top was 1065kg =/- 50kg |
|
| Author: | lump_a_charcoal [ Sun Jun 21, 2009 2:54 pm ] |
| Post subject: | Re: How much does a stock 1.3 LWB weigh? |
Rego papers will tell you... |
|
| Author: | want33s [ Sun Jun 21, 2009 3:06 pm ] |
| Post subject: | Re: How much does a stock 1.3 LWB weigh? |
lump_a_charcoal wrote: Rego papers will tell you...
Not in Qld.. It's only an estimate. |
|
| Author: | 11_evl [ Sun Jun 21, 2009 3:21 pm ] |
| Post subject: | Re: How much does a stock 1.3 LWB weigh? |
just put in a common weight and use that on the other setup |
|
| Author: | want33s [ Sun Jun 21, 2009 4:01 pm ] |
| Post subject: | Re: How much does a stock 1.3 LWB weigh? |
11_evl wrote: just put in a common weight and use that on the other setup
Yeah I thought about that but want it as realistic as possible... I guess 1250Kg will do |
|
| Author: | ca18zook [ Sun Jun 21, 2009 5:18 pm ] |
| Post subject: | Re: How much does a stock 1.3 LWB weigh? |
my lwb weight was 1200kg with 2 people in it and its a ute. But it has a ca18 in it and had a small amount of rubbish on the back Trent |
|
| Author: | Cade [ Sun Jun 21, 2009 6:13 pm ] |
| Post subject: | Re: How much does a stock 1.3 LWB weigh? |
i did not think they show 3 digits, how will you get the 1/4 mile time |
|
| Author: | Santos [ Sun Jun 21, 2009 6:56 pm ] |
| Post subject: | Re: How much does a stock 1.3 LWB weigh? |
i went with 1150 with a swb, i figured i'd go a little heavier rather than lighter |
|
| Author: | 2stroker [ Sun Jun 21, 2009 7:19 pm ] |
| Post subject: | Re: How much does a stock 1.3 LWB weigh? |
want33s wrote: How much does a stock 1.3 WT LWB weigh?
I don't have ready access to a weigh bridge and I want to try my G-tech performance meter out.. It is an accelerometer that mounts to windscreen and tells you: 0-60m/h 1/4 mile time and speed Cornering G's 60-0 braking distance Horsepower.. All you need to do is tell it how much the car weighs and then go testing. I want to compare old 1.3 to new 1.3/1.6 hybrid I've put together. Hey Jas i'll get in before TZAR or Royce does and give you the data: 0-60m/h = a long time 1/4 mile time and speed = a long time at a slow pace Cornering G's = very low due to incredibly slow speed and the fact the vehicle leans into the corner to allieviate the G force. 60-0 braking distance = a long way Horsepower = just a little less than a shetland pony with swine flu |
|
| Author: | want33s [ Sun Jun 21, 2009 9:45 pm ] |
| Post subject: | Re: How much does a stock 1.3 LWB weigh? |
2stroker wrote: Hey Jas i'll get in before TZAR or Royce does and give you the data: 0-60m/h = a long time 1/4 mile time and speed = a long time at a slow pace Cornering G's = very low due to incredibly slow speed and the fact the vehicle leans into the corner to allieviate the G force. 60-0 braking distance = a long way Horsepower = just a little less than a shetland pony with swine flu rofl... yeah I realise its no F1 car but I want to comparee old motor to new... just so I can justify $800 to the missus. |
|
| Author: | shep [ Sun Jun 21, 2009 10:33 pm ] |
| Post subject: | Re: How much does a stock 1.3 LWB weigh? |
want33s wrote: 2stroker wrote: Hey Jas i'll get in before TZAR or Royce does and give you the data: 0-60m/h = a long time 1/4 mile time and speed = a long time at a slow pace Cornering G's = very low due to incredibly slow speed and the fact the vehicle leans into the corner to allieviate the G force. 60-0 braking distance = a long way Horsepower = just a little less than a shetland pony with swine flu rofl... yeah I realise its no F1 car but I want to comparee old motor to new... just so I can justify $800 to the missus. just do what i do and make stuff up |
|
| Author: | Santos [ Mon Jun 22, 2009 1:09 am ] |
| Post subject: | Re: How much does a stock 1.3 LWB weigh? |
what are the details on the hybrd? i get around average 37hp on the gtech with a stock motor, but i may have to re-look at my launches cause i got 64hp by pretty much jumping straight to 4th from 2nd and flat footing it all the way to 100km (the first 20m readings are not used) going to recalibrate the tacho and the sensor (i got the RR) |
|
| Author: | TZAR [ Mon Jun 22, 2009 1:01 pm ] |
| Post subject: | Re: How much does a stock 1.3 LWB weigh? |
according to the suzuki owners manual SJ413K- Drop side ute 890kg GVM Gross vehicle mass = 1390kg SJ413W long body SJ413W Long body 900 kg for 2 seater SJ413W Long body 910 kg for 4 seater SJ413W Long body 910 kg for 2 seater with 15" wheels SJ413W Long body 920 kg for 4 seater with 15" wheels GVM Gross vehicle mass = 1370kg and for the standard versions SJ413 half metal door soft top version/SJ413Q soft top 850 kg for 2 seater 860 kg for 4 seater 860 kg for 2 seater with 15" wheels 870 kg for 4 seater with 15" wheels GVM Gross vehicle mass = 1320kg SJ413V 870 kg for 2 seater with 15" wheels 880 kg for 4 seater with 15" wheels GVM Gross vehicle mass = 1340kg |
|
| Author: | want33s [ Mon Jun 22, 2009 2:32 pm ] |
| Post subject: | Re: How much does a stock 1.3 LWB weigh? |
Cade wrote: i did not think they show 3 digits, how will you get the 1/4 mile time I haven't used it yet but in the instructions it has a 4 digit display for time.. EG: 22.18 Santos wrote: what are the details on the hybrd? My G-tech is a superceded model.
16V 1.6 bottom end (STD bore.. new rings and bearings) 8V 1.3 head. Extractors and 2" system. 1.6 IMPORT TBI. Thanks for the weight table TZAR. |
|
| Author: | Ridge [ Mon Jun 22, 2009 9:17 pm ] |
| Post subject: | Re: How much does a stock 1.3 LWB weigh? |
check out this site http://www.redbook.com.au/ you will find everything there |
|
| Author: | twitchy [ Tue Jun 23, 2009 1:46 am ] |
| Post subject: | Re: How much does a stock 1.3 LWB weigh? |
935kg according to this http://www.4x4.in.th/specification.html |
|
| Author: | Santos [ Tue Jun 23, 2009 1:47 am ] |
| Post subject: | Re: How much does a stock 1.3 LWB weigh? |
yah i had one of those older ones, from memory they only have one axs. ut they definately do 3 digit weights let u know how you go |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|