Bit late but just for the searchers, here's my spreadsheet of tailshaft lengths for Sierra Jimny Hilux landcruiser ect. If anyone can add to it, that'd be great.
| auszookers.com https://auszookers.com/forum/ |
|
| Tailshafts https://auszookers.com/forum/viewtopic.php?f=5&t=53241 |
Page 1 of 1 |
| Author: | burls [ Sun Sep 18, 2016 8:47 pm ] |
| Post subject: | Tailshafts |
After moving my diffs further apart l found myself needing longer tailshafts. I have hilux ones ATM but need longer 735 from flange to flange |
|
| Author: | tanshi [ Mon Sep 19, 2016 11:58 am ] |
| Post subject: | Re: Tailshafts |
just run spacers. |
|
| Author: | Argus Tuft [ Mon Sep 19, 2016 5:11 pm ] |
| Post subject: | Re: Tailshafts |
You've got the measurements, so get it made! |
|
| Author: | BlueSuzy [ Tue Sep 20, 2016 9:06 pm ] |
| Post subject: | Re: Tailshafts |
Stick your head under an 80, 79, 105 series cruiser, Hilux size unis, Same bolt pattern in front only with the high pinions. No DC joint. Rears are bigger, Bigger centre. I run 2x 80's front's. Keep one in my 4wd toolbox just incase. |
|
| Author: | burls [ Mon Sep 26, 2016 3:14 pm ] |
| Post subject: | Re: Tailshafts |
Im running Hilux shafts now. I think I will go spacers but they are hard to find. BlueSuzy could you run the tape over the 80 shafts for me? |
|
| Author: | BlueSuzy [ Tue Oct 04, 2016 9:19 pm ] |
| Post subject: | Re: Tailshafts |
80' Cruiser front- 780ish closed 79' Troopy front - 760ish closed I run the 80' in the front at about 800, And rear about 840mm. Lux and 80 splines are same length from memory. |
|
| Author: | burls [ Wed Oct 05, 2016 2:14 pm ] |
| Post subject: | Re: Tailshafts |
Thanks Bluey I ended up going the lazy ( eazy) way and getting spacers from LROR |
|
| Author: | sideways [ Wed Oct 05, 2016 2:26 pm ] |
| Post subject: | Re: Tailshafts |
Bit late but just for the searchers, here's my spreadsheet of tailshaft lengths for Sierra Jimny Hilux landcruiser ect. If anyone can add to it, that'd be great.
|
|
| Author: | BlueSuzy [ Wed Oct 05, 2016 2:43 pm ] |
| Post subject: | Re: Tailshafts |
Nice list! |
|
| Author: | henno [ Wed Oct 05, 2016 2:45 pm ] |
| Post subject: | Re: Tailshafts |
Awesome list. That will prove rather handy to me. |
|
| Author: | Gwagensteve [ Wed Oct 05, 2016 4:09 pm ] |
| Post subject: | Re: Tailshafts |
And this is why Facebook fails at teh tech and forums are awesome. Nice work sideways. |
|
| Author: | BlueSuzy [ Wed Oct 05, 2016 9:10 pm ] |
| Post subject: | Re: Tailshafts |
Good for custom conversions, FB is all about bolt-on's |
|
| Author: | henno [ Wed Oct 05, 2016 9:12 pm ] |
| Post subject: | Re: Tailshafts |
BlueSuzy wrote: FB is all about bolt-on's And blow-through turbos with booger-weld log manifolds on asthmatic G13BAs with 300,000km under the belt. |
|
| Author: | BlueSuzy [ Wed Oct 05, 2016 9:14 pm ] |
| Post subject: | Re: Tailshafts |
henno wrote: BlueSuzy wrote: FB is all about bolt-on's And blow-through turbos with booger-weld log manifolds on asthmatic G13BAs with 300,000km under the belt. Which belt? #sorryofftopic |
|
| Author: | henno [ Wed Oct 05, 2016 9:18 pm ] |
| Post subject: | Re: Tailshafts |
Wat paint did youse use on the belt? Looks mint af! |
|
| Author: | sideways [ Wed Oct 05, 2016 11:24 pm ] |
| Post subject: | Re: Tailshafts |
Cheers guys it took a fair while to put that together. Hopefully it can help some peeps. |
|
| Author: | burls [ Thu Oct 06, 2016 9:59 am ] |
| Post subject: | Re: Tailshafts |
Nice work Sideways, never too late, may go searching for some cruiser ones to try. Then sell the spacers |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|