| auszookers.com https://auszookers.com/forum/ |
|
| Series 2 Vitara Auto brake pedal - pinouts please ? https://auszookers.com/forum/viewtopic.php?f=5&t=53281 |
Page 1 of 1 |
| Author: | rexhunta [ Mon Sep 26, 2016 9:08 pm ] |
| Post subject: | Series 2 Vitara Auto brake pedal - pinouts please ? |
Hoping someone will be able to give me a hand please, I've got a series 2 vitara 4 speed auto that I need to find the pinouts on the 4 pin plug that goes onto the brake switch itself please. These 2 were cut when the loom was removed from the car and I can not find any other cut wires. The 2 I can't trace are Blue/Green Green. on the plug blue/green is the bottom left hand pin, green is the top right hand. My manuals don't show either of these pin outs. Any help would be greatly appreciated. Thanks Pete. |
|
| Author: | rexhunta [ Sat Oct 01, 2016 8:09 pm ] |
| Post subject: | Re: Series 2 Vitara Auto brake pedal - pinouts please ? |
future reference, green is power in from the sierra fusebox for constant power, and the blue/green goes to the shift solenoid. Green white goes to the brake light and both ecus for what i think is the TCC setup on the 4 speed, and the orange/green goes to the shifter harness. Pete. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|