| auszookers.com https://auszookers.com/forum/ |
|
| Jimny M13A engine conversion options. https://auszookers.com/forum/viewtopic.php?f=5&t=53508 |
Page 1 of 1 |
| Author: | Jackass181 [ Tue Nov 08, 2016 8:45 pm ] |
| Post subject: | Jimny M13A engine conversion options. |
Jimny 2000 M13A ive had a couple issues with my engine recently and a compression test reveals the engine is on its last legs. done 250000kms so no surprises there. now i want to swap out the engine but what options do i have? is it easy enough to just chuck in another m series(how easily do they go in?). will a vvt motor work on mine seeing as its non vvt? my mate said he can get a 2012 swift K14B engine for really cheap but i didnt think it would be compatible. if it is thats great but i would just like to know what options i have. cheers |
|
| Author: | sideways [ Tue Nov 08, 2016 9:37 pm ] |
| Post subject: | Re: Jimny M13A engine conversion options. |
Pre VVT M15a from a Holden Cruze (the small 4WD one, not the sedan) is practically worthless at a wrecker and a very easy conversion. There's a very informative thread on M series Jimny conversions here. It's basically swap some bits over, bolt the motor in, plug the wires in and go. K series motors aren't a worthwhile conversion for us aussies. |
|
| Author: | Jackass181 [ Wed Nov 09, 2016 1:18 pm ] |
| Post subject: | Re: Jimny M13A engine conversion options. |
cheers for the idea im hunting down a cruze now |
|
| Author: | gutshot [ Sat Jun 10, 2017 8:46 am ] |
| Post subject: | Re: Jimny M13A engine conversion options. |
will m15a non vvt manual motor from a holden cruze fit onto a automatic m13a 2003 jimny non vvt? thanks david |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|