| auszookers.com https://auszookers.com/forum/ |
|
| 99 grand vitara spring change https://auszookers.com/forum/viewtopic.php?f=5&t=53712 |
Page 1 of 1 |
| Author: | feral4mr2 [ Thu Dec 29, 2016 4:55 pm ] |
| Post subject: | 99 grand vitara spring change |
Hi, putting some ~2" kings springs into the wife's grand vitara. rear was easy peasy. the fronts on the other hand.. can't get spring compressors on the spring properly. does the the shaft need to be removed? it does look like it will be much easier to access the spring without the shaft in place. any tips would be appreciated. cheers. 
|
|
| Author: | got_bar_work [ Thu Dec 29, 2016 7:06 pm ] |
| Post subject: | Re: 99 grand vitara spring change |
Support the car on standa. Put a jack under the arm Drop the chassis bolts out. Lower the jack and swap the springs |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|