| auszookers.com https://auszookers.com/forum/ |
|
| What tyre pressure for Yokohama geolander AT Jimny? https://auszookers.com/forum/viewtopic.php?f=5&t=53743 |
Page 1 of 1 |
| Author: | Spice_1 [ Fri Jan 06, 2017 11:32 am ] |
| Post subject: | What tyre pressure for Yokohama geolander AT Jimny? |
Hey guys what tyre pressure should i pump into my Geolanders all terrain on my Jimny? Cheers |
|
| Author: | Gwagensteve [ Fri Jan 06, 2017 12:17 pm ] |
| Post subject: | Re: What tyre pressure for Yokohama geolander AT Jimny? |
Approximately what's on the placard. |
|
| Author: | THE_DICTATOR [ Fri Jan 06, 2017 3:55 pm ] |
| Post subject: | Re: What tyre pressure for Yokohama geolander AT Jimny? |
Size is more important then brand |
|
| Author: | vet 180 [ Sat Jan 07, 2017 1:44 am ] |
| Post subject: | Re: What tyre pressure for Yokohama geolander AT Jimny? |
Spice_1 wrote: Hey guys what tyre pressure should i pump into my Geolanders all terrain on my Jimny? Cheers 26 onroad 10-12 offroad for now |
|
| Author: | Gwagensteve [ Sat Jan 07, 2017 7:18 am ] |
| Post subject: | Re: What tyre pressure for Yokohama geolander AT Jimny? |
The OP might not sit on 140km/h cruising though, and with the stiffer construction of an LT tyre they might not need as much as 26psi. |
|
| Author: | THE_DICTATOR [ Sat Jan 07, 2017 9:41 am ] |
| Post subject: | Re: What tyre pressure for Yokohama geolander AT Jimny? |
Gwagensteve wrote: The OP might not sit on 140km/h cruising though, and with the stiffer construction of an LT tyre they might not need as much as 26psi. Have a guess at what pressure the tyre placard says |
|
| Author: | Gwagensteve [ Sat Jan 07, 2017 10:16 am ] |
| Post subject: | Re: What tyre pressure for Yokohama geolander AT Jimny? |
Yeah, I reckon it says 26. And that's for a P-metric tyre with no load rating. That's why I said "approximately" If the 4psi technique was applied to those geolandars, I bet they'd need a lot less than 26. |
|
| Author: | vet 180 [ Sat Jan 07, 2017 4:40 pm ] |
| Post subject: | Re: What tyre pressure for Yokohama geolander AT Jimny? |
Gwagensteve wrote: Yeah, I reckon it says 26. And that's for a P-metric tyre with no load rating. That's why I said "approximately" If the 4psi technique was applied to those geolandars, I bet they'd need a lot less than 26. True, but the OP is looking for a number to start. So I gave it to him. No idea what load rating the OP has, but geolanders ATs' in general are a bit softer than other AT's on the market. |
|
| Author: | Jezzza [ Mon Apr 10, 2017 10:00 am ] |
| Post subject: | Re: What tyre pressure for Yokohama geolander AT Jimny? |
Sorry to post in old thread What tyre pressure should I run with 235/75/15 Geolanders AT in a Vitara SWB on road? |
|
| Author: | Gwagensteve [ Mon Apr 10, 2017 4:07 pm ] |
| Post subject: | Re: What tyre pressure for Yokohama geolander AT Jimny? |
Gwagensteve wrote: Approximately what's on the placard. There's the answer. If you want to try an experiment, you can try the 4psi "rule" - this will likely indicate a pressure a few psi under the placarded pressure due to the stiffer tyre you've fitted. . There's also some personal preference involved, but not much. In my cars I generally run at the "high load/high speed" recommendation on the placard because I like a firmer feel on cornering, but I don't on my defender because it takes the rear tyres to something like 65psi. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|