| Author |
Message |
Aaron

az supporter
Joined: Thu Jan 21, 2010 10:30 pm Posts: 348 Location: Goldcoast, Pac Pines
|
 Posted: Mon Aug 22, 2011 7:20 am |
|
hey guys i got a new/ second hand carby for my car the other day and in my rush to fit it i pulled all the vacume hoses off and now i dont know where they go  so i wacked em all on in some retard order and she isnt running right so if someone has a diagram or pictures of where they go that would be sweet. btw car is a 1988 suzuki sierra g13a carby
|
|
|
|
 |
Aaron

az supporter
Joined: Thu Jan 21, 2010 10:30 pm Posts: 348 Location: Goldcoast, Pac Pines
|
 Posted: Sat Aug 27, 2011 7:29 am |
|
Hey guys im still having trouble with it when i pull up to the traffic lights it will just stop and when im driving along ( mainly in low range ) and take my foot off the accelerator to slow down a bit then go to accelerate again it bunnyhops and gives a mild whip lash 
_________________ Sierra, 32's, Airlocked, 6.5'd, hopefully ruf soon
|
|
|
|
 |
Rhino

az supporter
Joined: Tue Oct 13, 2009 10:30 pm Posts: 928 Location: Sunny Coast
Vehicle: 79 Lj80 stockman 94 swb Sierra
|
 Posted: Sat Aug 27, 2011 7:50 am |
|
|
If you can wait till tomorrow arvo I'll get some pics for ya mate.
Does yours have the little vacume valve on the airbox or is it manual??
_________________ We are amphibious
|
|
|
|
 |
Aaron

az supporter
Joined: Thu Jan 21, 2010 10:30 pm Posts: 348 Location: Goldcoast, Pac Pines
|
 Posted: Sat Aug 27, 2011 9:12 am |
|
|
ummm it has a vacume line on the air box but it never went to the carby i dont think HAHAHA i really should have labbeled it, thanks mate Aaron
_________________ Sierra, 32's, Airlocked, 6.5'd, hopefully ruf soon
|
|
|
|
 |
zooky08

az supporter
Joined: Fri Nov 27, 2009 10:30 pm Posts: 3426 Location: imbil/gympie. qld
Vehicle: 03 Jimny
|
 Posted: Sat Aug 27, 2011 9:19 am |
|
|
_________________ 03 Jimny 30 km2s 75mm lift f&r locked winch
|
|
|
|
 |
steve125
Joined: Sun Sep 05, 2010 11:58 am Posts: 427 Location: Melbourne
Vehicle: LWB Sierra (assembly required)
|
 Posted: Sun Aug 28, 2011 3:18 am |
|
This is a '95 Sierra so it may be a little different, but here goes.
#1 goes to the airbox
#2 goes to the switch labelled #3
#4 also goes to #3
#5 (diaphram just out of shot) goes to the thermostat
#6 goes to the engine side of carby
#9 goes to switch on firewall just above brake booster
#7 goes to the distributor
#8 goes to charcoal canister
#10 goes to switch on firewall above brake booster, same as #9

|
|
|
|
 |
Aaron

az supporter
Joined: Thu Jan 21, 2010 10:30 pm Posts: 348 Location: Goldcoast, Pac Pines
|
 Posted: Sun Aug 28, 2011 4:19 am |
|
|
thanks alot for that one mate i owe you one thats for sure.
Edit: this should go into tech very usefull
|
|
|
|
 |
zooky08

az supporter
Joined: Fri Nov 27, 2009 10:30 pm Posts: 3426 Location: imbil/gympie. qld
Vehicle: 03 Jimny
|
 Posted: Sun Aug 28, 2011 5:35 am |
|
I have two #3 switches and no firewall switch so can't work out some hoses 
_________________ 03 Jimny 30 km2s 75mm lift f&r locked winch
|
|
|
|
 |
want33s

az supporter
Joined: Fri Nov 16, 2007 10:30 pm Posts: 8135 Location: Sunshine Coast Qld
|
 Posted: Tue Mar 20, 2012 7:17 am |
|
|
The firewall mounted switch only controls vacuum for the AC idle up.
|
|
|
|
 |
Aaron

az supporter
Joined: Thu Jan 21, 2010 10:30 pm Posts: 348 Location: Goldcoast, Pac Pines
|
 Posted: Tue Mar 20, 2012 7:26 pm |
|
|
there is a few different configurations ill get some pics of mine tommorow, i copied my brothers sierra.
_________________ Sierra, 32's, Airlocked, 6.5'd, hopefully ruf soon
|
|
|
|
 |
Phillg

newbie
Joined: Sat Nov 05, 2016 1:29 pm Posts: 1
Vehicle: 1993 suzuki vitara
|
 Posted: Sat Nov 05, 2016 1:36 pm |
|
|
Hi i am new on here , but was wondering if someone had some idea on how the vacuum lines run on a 1993 8v vitara
|
|
|
|
 |
seb7701

newbie
Joined: Wed Feb 01, 2017 8:13 pm Posts: 3 Location: Roma, Qld
Vehicle: Sierra 1.3
|
 Posted: Thu Feb 02, 2017 8:32 pm |
|
|
This is really great - I was wondering how the heck to work out the spaghetti of hose on mine too!!
|
|
|
|
 |
Greencomet0

newbie
Joined: Sat Feb 04, 2017 11:24 pm Posts: 4
Vehicle: Sierra 1.3jx 1990
|
 Posted: Sun Feb 05, 2017 5:51 pm |
|
|
Hi could somebody here please give me a hand with my vacuum hoses aswell? I have a 1990 1.3jx and none of the pictures seem to match what I have and aren't sure how to work it out
|
|
|
|
 |
jdk81
Joined: Sat Jul 18, 2009 11:30 pm Posts: 2372 Location: Ballarat, VIC
|
 Posted: Mon Feb 06, 2017 7:38 am |
|
|
Take some pictures for us.
Host the pics in photobucket, or some other site, and post the links here.
|
|
|
|
 |
Greencomet0

newbie
Joined: Sat Feb 04, 2017 11:24 pm Posts: 4
Vehicle: Sierra 1.3jx 1990
|
 Posted: Mon Feb 06, 2017 12:59 pm |
|
|
|
 |
Greencomet0

newbie
Joined: Sat Feb 04, 2017 11:24 pm Posts: 4
Vehicle: Sierra 1.3jx 1990
|
 Posted: Mon Feb 06, 2017 2:32 pm |
|
|
|
 |
|