These are specs from the Suzuki Jimny workshop manual
Leading arm is Radius arm
| auszookers.com https://auszookers.com/forum/ |
|
| Suspension Torque Specs https://auszookers.com/forum/viewtopic.php?f=5&t=53965 |
Page 1 of 1 |
| Author: | tyrone984 [ Fri Mar 03, 2017 10:15 pm ] |
| Post subject: | Suspension Torque Specs |
Hi guys, Installing the JimnyBits 50mm lift kit on my 2016 Jimny on the weekend and was wondering if anyone knows the torque specs for suspension on a 2016 Jimny. Thanks. |
|
| Author: | BlueSuzy [ Sat Mar 04, 2017 6:58 pm ] |
| Post subject: | Re: Suspension Torque Specs |
Tight with springwashes/lockwashers. Torque won't make a difference. The bushes should have crushtubes. Check nuts again after a good drive |
|
| Author: | shep [ Sat Mar 04, 2017 7:24 pm ] |
| Post subject: | Re: Suspension Torque Specs |
What tim said but also recheck them every 5000km or so. Jimnys seem to be good at undoing bolts |
|
| Author: | BlueSuzy [ Sat Mar 04, 2017 8:39 pm ] |
| Post subject: | Re: Suspension Torque Specs |
These are specs from the Suzuki Jimny workshop manual Leading arm is Radius arm
|
|
| Author: | tyrone984 [ Sat Mar 04, 2017 10:09 pm ] |
| Post subject: | Re: Suspension Torque Specs |
Thanks a lot. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|