auszookers.com
https://auszookers.com/forum/

Brake line proportioning valve
https://auszookers.com/forum/viewtopic.php?f=5&t=53972
Page 1 of 1

Author:  bogga [ Sun Mar 05, 2017 10:19 am ]
Post subject:  Brake line proportioning valve

Any recommendations on a after market brake proportioning valve, 2 line into one.

Set up with vit vented front discs, sierra discs rear with ADD floater kit, sierra MC.

Author:  Gwagensteve [ Sun Mar 05, 2017 10:51 am ]
Post subject:  Re: Brake line proportioning valve

I use the one from low range offroad. (I think it's a Wilwood part) Works very well.

You might find the Sierra MC a little small - pedal might be a but low/long.

Easy enough to swap to a larger cylinder like a forester 15/16

Steve.

Author:  bogga [ Sun Mar 05, 2017 10:57 am ]
Post subject:  Re: Brake line proportioning valve

Was looking at the lror one.
Is the Forester good as bolt in?

Author:  Gwagensteve [ Sun Mar 05, 2017 11:50 am ]
Post subject:  Re: Brake line proportioning valve

Yes - just need a pushrod mod. Theres a couple of different diameters so you can tune pedal feel to suit. Because I'm unboosted I've swapped down from the 1 1/16" GT MC to a regular 15/16 forester MC, but with a booster I don't think that's necessary. They're cheap enough and plentiful from a pull it yourself wrecker.

Author:  bogga [ Sun Mar 05, 2017 12:09 pm ]
Post subject:  Re: Brake line proportioning valve

Thanks Steve

Author:  BlueSuzy [ Sun Mar 05, 2017 1:31 pm ]
Post subject:  Re: Brake line proportioning valve

I think mine is a spidertrax one. There's many different brands.

My front brake circuit is separate to my rear

Author:  Gwagensteve [ Sun Mar 05, 2017 4:07 pm ]
Post subject:  Re: Brake line proportioning valve

I think all narrow tracks are front/rear split.

I reckon nearly all valves come from wilwood, the reseller just puts them in their own bag.

Author:  THE_DICTATOR [ Sun Mar 05, 2017 5:27 pm ]
Post subject:  Re: Brake line proportioning valve

SJ50 wide track are front rear as well

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/