| auszookers.com https://auszookers.com/forum/ |
|
| J20a valve rocker cover gasket https://auszookers.com/forum/viewtopic.php?f=5&t=54369 |
Page 1 of 1 |
| Author: | 30ONA [ Thu Jul 06, 2017 4:14 pm ] |
| Post subject: | J20a valve rocker cover gasket |
I need to replace mine but have noticed some kits have a half moon seal some don't. Do I need one for this motor. All kits have gasket, tube seals and nut seals but not all have a half moon seal. |
|
| Author: | losfer [ Thu Jul 06, 2017 6:46 pm ] |
| Post subject: | Re: J20a valve rocker cover gasket |
Hey Max , Quite often the aftermarket gaskets have the "D" seal incorporated into the rocker cover gasket itself, same with the plug tube seals , some have the plug tube seals attached with a thin section of rubber between the gasket and seals. if the picture of the one you want to order doesnt have a clear image of the gasket with incorporated "D" seal or a seperate "D" seal, then they are not hard or expensive to source seperately. Your engine does use a seperate "D" seal from factory. |
|
| Author: | 30ONA [ Thu Jul 06, 2017 7:33 pm ] |
| Post subject: | Re: J20a valve rocker cover gasket |
Legend thanks. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|