| auszookers.com https://auszookers.com/forum/ |
|
| Anyone got - Working guides with photos g16b swap https://auszookers.com/forum/viewtopic.php?f=5&t=54482 |
Page 1 of 1 |
| Author: | justinboo [ Fri Aug 11, 2017 6:27 pm ] |
| Post subject: | Anyone got - Working guides with photos g16b swap |
LOOM SWAP Complete swap including the stalks 91 Lwb Jx g16b (auto) to a sj51 g13 What are the issues with swapping to a manual from the donor auto? Anyone got wiring diagrams etc or a guide or doing the complete swap Thanks |
|
| Author: | justinboo [ Sat Aug 12, 2017 9:18 pm ] |
| Post subject: | Re: Anyone got - Working guides with photos g16b swap |
Help....... me....... Sent from my iPhone using Tapatalk |
|
| Author: | Gwagensteve [ Sat Aug 12, 2017 10:26 pm ] |
| Post subject: | Re: Anyone got - Working guides with photos g16b swap |
Keep the auto. |
|
| Author: | justinboo [ Sun Aug 13, 2017 6:49 am ] |
| Post subject: | Re: Anyone got - Working guides with photos g16b swap |
Want to keep the original g13 manual Auto gearbox is stuffed Sent from my iPhone using Tapatalk |
|
| Author: | MrRocky [ Sun Aug 13, 2017 7:44 am ] |
| Post subject: | Re: Anyone got - Working guides with photos g16b swap |
Just slap it all in and use a simple relay to power up the ignition on the vit loom to match the sierra igntion signal. If you try strip it all down with no idea theres every chance you will stuff it. Suzistore and suzishop in the west will do a cut down labelled vit loom |
|
| Author: | justinboo [ Sun Aug 13, 2017 8:48 am ] |
| Post subject: | Re: Anyone got - Working guides with photos g16b swap |
Okay how about... Using the entire loom apart from the auto plugs Is there any difference considering the gearbox is not electronically controlled Sent from my iPhone using Tapatalk |
|
| Author: | Toomanycars [ Sun Aug 13, 2017 10:02 am ] |
| Post subject: | Re: Anyone got - Working guides with photos g16b swap |
You need to get a loom made... We have a 1.6 conversion and it was a PITA.... The new tagged loom was a "must have"!!!! |
|
| Author: | MrRocky [ Sun Aug 13, 2017 12:54 pm ] |
| Post subject: | Re: Anyone got - Working guides with photos g16b swap |
The ecu for the auto box is seperate so in short yes you can run the auto loom with a manual. I know on balenos the ecu is the same for both box configurations. I wouldnt say a cut down loom is a must have, if planning on cutting the loom yourself it can be benifical to install a full loom to remove any troubleshooting issues initially and then begin chopping |
|
| Author: | justinboo [ Sun Aug 13, 2017 7:54 pm ] |
| Post subject: | Re: Anyone got - Working guides with photos g16b swap |
Perfect took the whole thing out today Seems to be about 3 ecu type things Sent from my iPhone using Tapatalk |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|