| auszookers.com https://auszookers.com/forum/ |
|
| A/C pully for g16b sierra swap. https://auszookers.com/forum/viewtopic.php?f=5&t=54587 |
Page 1 of 1 |
| Author: | Perram [ Mon Sep 18, 2017 12:35 pm ] |
| Post subject: | A/C pully for g16b sierra swap. |
Hey has anyone made the sierra ac work with a different pully after doing the g16b swap? Or do you just change the compressor Sent from my SM-G900I using Tapatalk |
|
| Author: | hooki [ Tue Sep 19, 2017 2:02 pm ] |
| Post subject: | Re: A/C pully for g16b sierra swap. |
I couldn't find a multi-rib pulley to suit the sierra a/c compressor, so I just ended up running a g16b vitara a/c compressor on the factory vitara aircon/power steering brackets. |
|
| Author: | Perram [ Tue Sep 19, 2017 8:52 pm ] |
| Post subject: | Re: A/C pully for g16b sierra swap. |
hooki wrote: I couldn't find a multi-rib pulley to suit the sierra a/c compressor, so I just ended up running a g16b vitara a/c compressor on the factory vitara aircon/power steering brackets. Awesome. I think thats what i will look into.Did the hoses fit? Sent from my SM-G900I using Tapatalk |
|
| Author: | Scrawny [ Wed Sep 20, 2017 7:03 am ] |
| Post subject: | Re: A/C pully for g16b sierra swap. |
I'm going to run the complete Baleno setup as it came out of the car, p/s pump and A/C compressor. I just plan to modify all hoses to fit |
|
| Author: | hooki [ Thu Sep 21, 2017 2:12 am ] |
| Post subject: | Re: A/C pully for g16b sierra swap. |
Perram wrote: hooki wrote: I couldn't find a multi-rib pulley to suit the sierra a/c compressor, so I just ended up running a g16b vitara a/c compressor on the factory vitara aircon/power steering brackets. Awesome. I think thats what i will look into.Did the hoses fit? Yep all the factory sierra A/C hoses hook up. If you're running a vitara power steering pump on the bracket it will position the pump lower, so the radiator support mount on the chassis needs to moved forward/modified so the pump doesn't fowl it. |
|
| Author: | Marko_SJ [ Thu Sep 21, 2017 11:13 am ] |
| Post subject: | Re: A/C pully for g16b sierra swap. |
Anyone running the power steer and A/C from the Vit G16B in a sierra? Cheers, Mark |
|
| Author: | Blkfxx [ Thu Sep 21, 2017 1:38 pm ] |
| Post subject: | Re: A/C pully for g16b sierra swap. |
If I recall correctly jr.zook was, Mark. Jake, I've got that baleno compressor here if you want it, no mount for it though. |
|
| Author: | Perram [ Thu Sep 21, 2017 9:58 pm ] |
| Post subject: | Re: A/C pully for g16b sierra swap. |
Blkfxx wrote: If I recall correctly jr.zook was, Mark. Yes please Jake, I've got that baleno compressor here if you want it, no mount for it though. Sent from my SM-G900I using Tapatalk |
|
| Author: | Marko_SJ [ Fri Sep 22, 2017 9:12 am ] |
| Post subject: | Re: A/C pully for g16b sierra swap. |
Thanks Blkfxx. Will check out his thread yet again. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|