| auszookers.com https://auszookers.com/forum/ |
|
| Jimny vvt motor into pre vvt https://auszookers.com/forum/viewtopic.php?f=5&t=55076 |
Page 1 of 1 |
| Author: | jimbo_jones [ Sun Mar 18, 2018 8:36 pm ] |
| Post subject: | Jimny vvt motor into pre vvt |
All credit go’s to Craig Wood he posted this on the Suzuki Jimny Owners Of Australia Facebook group. Just a heads up to all non vvt owners that i've solved how to convert a vvt engine into a non vvt. Its quite simple. Parts required: VVT engine(m13a,m15a,m18a) and your old non vvt engine too Basic Instructions: VVT engine- remove valve cover, timing chain cover and intake vvt camshaft (these are obsolete now) NON VVT engine- remove valve cover, timing chain cover and your non vvt intake camshaft (place these parts on the vvt engine) Interesting find is the m13a/m15a and m18a all share the same camshaft profile (i would assume the m15a ignis sport and m16a swift sport may have a more aggressive profile) your m13a timing covers are amazingly the same height as the m15/16 and 18a block. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|