| auszookers.com https://auszookers.com/forum/ |
|
| Clutch problem h25a 2.5 conversion https://auszookers.com/forum/viewtopic.php?f=5&t=55130 |
Page 1 of 1 |
| Author: | Montys2.5 [ Wed Apr 18, 2018 7:45 pm ] |
| Post subject: | Clutch problem h25a 2.5 conversion |
Clutch problem. I have a converted 2.5 vitara 95 lwb I’ve replaced the clutch with a HD h25a but since installing, its doesn’t engage and makes a whooshing sound as if there’s lots of air or clutch is permanently on. First I thought it was throw out bearing so dropped box out again, then I thought it could be master cylinder and slave cylinder as I had problems with bleeding and getting pressure as it only took not even 50ml of fluids. Car still makes big air noice on release of clutch still won’t engage a gear. Car starts in gear without clutch. Not certain which box is in the car or if there’s a difference in h20 - h25a clutches |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|