hey, I'm just wondering if anyone knows if you can take out the side windows in the back of a 84 Sierra and replace them with panels?
If this is possible can you buy them from somewhere or do i have to make them myself ?
cheers
| auszookers.com https://auszookers.com/forum/ |
|
| Sierra: Rear window conversion to Panels https://auszookers.com/forum/viewtopic.php?f=5&t=5537 |
Page 1 of 1 |
| Author: | Snub-Nose [ Mon Jul 13, 2009 3:41 am ] |
| Post subject: | Sierra: Rear window conversion to Panels |
hey, I'm just wondering if anyone knows if you can take out the side windows in the back of a 84 Sierra and replace them with panels? If this is possible can you buy them from somewhere or do i have to make them myself ? cheers
|
|
| Author: | unique_seek [ Mon Jul 13, 2009 1:41 pm ] |
| Post subject: | Re: Sierra: Rear window conversion to Panels |
Anything is posible wth some time and money,I'm sure someone on here has already done ths mod???but I wouls be interested in it too...can't see it being hard though.. |
|
| Author: | lump_a_charcoal [ Mon Jul 13, 2009 2:20 pm ] |
| Post subject: | Re: Sierra: Rear window conversion to Panels |
What about polycarbonate? Just cut it to size and insert it into the window rubbers... |
|
| Author: | 2stroker [ Mon Jul 13, 2009 2:29 pm ] |
| Post subject: | Re: Sierra: Rear window conversion to Panels |
|
|
| Author: | atari4x4 [ Mon Jul 13, 2009 4:56 pm ] |
| Post subject: | Re: Sierra: Rear window conversion to Panels |
sort of like this? these are just stock windows colour matched & painted, it's a hand full of screws to change them over. in summer the zook stays heaps cooler & they still pop out for extra cooling. 
|
|
| Author: | Snub-Nose [ Mon Jul 13, 2009 5:19 pm ] |
| Post subject: | Re: Sierra: Rear window conversion to Panels |
Cheers guy's, you's all had good idea's but the musty orange looking zook with windows completely Fabricated over is the way I reckon i should go. thanks for chucking that picture up 2stroker. 
I'm Sure I can find a place that would be able to make up the panels for me. I'm just a bit worried about welding on the body, because the metal's pretty thin, but then i guess i can just grind the welds back flush with the rest of the body, bog it and then paint the bastard.. 
|
|
| Author: | Rockhopper [ Mon Jul 13, 2009 9:09 pm ] |
| Post subject: | Re: Sierra: Rear window conversion to Panels |
2stroker wrote: Bling Bling. Looks pretty horny 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|