| auszookers.com https://auszookers.com/forum/ |
|
| Rocksliders https://auszookers.com/forum/viewtopic.php?f=5&t=55423 |
Page 1 of 1 |
| Author: | benjamin181991 [ Wed Sep 12, 2018 11:09 am ] |
| Post subject: | Rocksliders |
Does anyone happen to know of anywhere that makes or supplies rocksliders (besides xrox) for Sierra's in Victoria. Cheers. |
|
| Author: | Gwagensteve [ Wed Sep 12, 2018 11:32 am ] |
| Post subject: | Re: Rocksliders |
Are you sure you want then? The loss of sill clearance is a pretty big drawback. Plating over the stock sills retains ground clearance but prevents panel damage. |
|
| Author: | alien [ Wed Sep 12, 2018 10:31 pm ] |
| Post subject: | Re: Rocksliders |
See if shandy92's build thread is still alive - his vitara ran box section to fill up cut-out sills and was incredibly strong. |
|
| Author: | Gwagensteve [ Thu Sep 13, 2018 8:11 am ] |
| Post subject: | Re: Rocksliders |
Yes, I’ve done that too and it’s excellent. However that renders the car a statutory write off and engineers in Victoria won’t certify a car with modified sills. Could be a show stopper if the car was defected. |
|
| Author: | jonno_racing [ Thu Sep 13, 2018 11:34 am ] |
| Post subject: | Re: Rocksliders |
Gwagensteve wrote: Are you sure you want then? The loss of sill clearance is a pretty big drawback. Plating over the stock sills retains ground clearance but prevents panel damage. great till you use them and it does this https://youtu.be/aBQ5t1EGAlE?t=4m50s this was rhs Sills and used pretty hard but broke nearly all the center body mounts. |
|
| Author: | Toomanycars [ Thu Sep 13, 2018 11:52 am ] |
| Post subject: | Re: Rocksliders |
That sierra chassis in the video has the same front suspension set up as our 1.6 Sierra has. |
|
| Author: | jonno_racing [ Thu Sep 13, 2018 12:37 pm ] |
| Post subject: | Re: Rocksliders |
thats my current build, im vloging it rather than forum posts. |
|
| Author: | rpmwrx [ Thu Sep 13, 2018 5:25 pm ] |
| Post subject: | Re: Rocksliders |
JWB Customs based in Melton. He does sliders for swb and lwb Sierra's. https://www.gumtree.com.au/s-seller/JWB ... 1010490959 Hope that helps. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|