| auszookers.com https://auszookers.com/forum/ |
|
| Prop shaft https://auszookers.com/forum/viewtopic.php?f=5&t=55608 |
Page 1 of 1 |
| Author: | Barna [ Sat Jan 19, 2019 10:37 pm ] |
| Post subject: | Prop shaft |
Hey guys! I need some help. I have an 03 Suzuki jimny, I need to change the rear propeller shaft CV joint, but I don't find anywhere if it is possible or I have to buy the whole propeller shaft. It has a crazy knocking sound under load. Thanks for any help. |
|
| Author: | Darrell [ Sun Jan 20, 2019 10:02 am ] |
| Post subject: | Re: Prop shaft |
Suzuki don't seem to list the universal joint. They expect you to replace the whole shaft, however looking at the prop online it appears the joint is held in with circlips and therefore I see no reason why it can't be replaced. I guess your have to try and size it up beforehand. |
|
| Author: | Gwagensteve [ Sun Jan 20, 2019 10:23 am ] |
| Post subject: | Re: Prop shaft |
It's most likely common to the WT Sierra and Vitara. |
|
| Author: | shep [ Sun Jan 20, 2019 10:28 am ] |
| Post subject: | Re: Prop shaft |
If it is the same as my old jimny then the unis are staked and the whole shaft needs to be replaced |
|
| Author: | greenzook89 [ Sun Jan 20, 2019 7:09 pm ] |
| Post subject: | Re: Prop shaft |
You can rebuild them, or get a HD one with unis both ends from Jimny bits. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|