royce wrote:
lol that link has been around for at least 2002
amazingly the technique is the same
| auszookers.com https://auszookers.com/forum/ |
|
| How to weld diffs? https://auszookers.com/forum/viewtopic.php?f=5&t=5562 |
Page 1 of 1 |
| Author: | hardknocks [ Wed Jul 15, 2009 1:15 am ] |
| Post subject: | How to weld diffs? |
Hey , I've had a look around old threads looking for how to weld up diffs . I've got an old stockman and want to weld the rear diff to get up my driveway. So if anyone can send my in the right direction Thanks |
|
| Author: | Zook_Fan [ Wed Jul 15, 2009 1:16 am ] |
| Post subject: | Re: How to weld diffs? |
it is in the outers bible, will get a link for you. |
|
| Author: | Zook_Fan [ Wed Jul 15, 2009 1:20 am ] |
| Post subject: | Re: How to weld diffs? |
here you go: http://www.island4x4.com/4x4tech/axle/weldeddiff1/ it is pretty good instructions. |
|
| Author: | royce [ Wed Jul 15, 2009 1:26 am ] |
| Post subject: | Re: How to weld diffs? |
lol that link has been around for at least 2002 |
|
| Author: | hardknocks [ Wed Jul 15, 2009 1:30 am ] |
| Post subject: | Re: How to weld diffs? |
Thanks will have a look now |
|
| Author: | Zook_Fan [ Wed Jul 15, 2009 1:33 am ] |
| Post subject: | Re: How to weld diffs? |
royce wrote: lol that link has been around for at least 2002
amazingly the technique is the same
|
|
| Author: | shep [ Wed Jul 15, 2009 1:45 am ] |
| Post subject: | Re: How to weld diffs? |
another method.
http://www.pirate4x4.com/forum/showthread.php?t=763645 
|
|
| Author: | foolsp33d [ Wed Jul 15, 2009 2:40 am ] |
| Post subject: | Re: How to weld diffs? |
lol, that was a great thread eh shep lol.. along the same lines... http://www.gixxer.com/forums/showthread.php?t=226570 |
|
| Author: | hardknocks [ Wed Jul 15, 2009 4:58 pm ] |
| Post subject: | Re: How to weld diffs? |
that is a classic , a mind with no logic hahaha |
|
| Author: | 3cyl [ Wed Jul 15, 2009 7:52 pm ] |
| Post subject: | Re: How to weld diffs? |
Man you must have SOME driveway! We used to weld the sidegear tooth voids (weld 2 leave 2 etc) till we discovered Lockrights. |
|
| Author: | kenn [ Wed Jul 15, 2009 10:53 pm ] |
| Post subject: | Re: How to weld diffs? |
We used to use Lockwrongs too, till we got airlockers..
|
|
| Author: | hardknocks [ Sun Jul 19, 2009 7:37 pm ] |
| Post subject: | Re: How to weld diffs? |
yer my driveway is a killer, I've been using my 93 hardtop zook to drag up half a trailer full of cement at time.I've done about 50m and about 100m to go. But I thought my old 800cc stockman ute could use a few mods to give my 1.3 sierra a brake. Now that I've cemented one of the steepiest parts of the driveway. I was thinking a welded diff would help in tackling the driveway and a better set of rubber . My driveway is 35 degrees at parts , so do you think it's worth it ? I was thinking of doing it just as experiment anyway , but if it's going to brake everything else I won't bother ? Would rather have her running than fixing stuff ! I never posted pics on this site because the only internet I have is from my iPhone and I can load pics from it to this site. 93 hardtop 1.3 31' big horns 2' inch body lift 2' inch shackles Reduction gears Rtc damper Recently brought 84 Lwb ute 1.3 swift Fibre glass roof front to back 2' spring lift Sunrisers Ok I'll give her a mention 79 stockman cluncker 800cc roar power Stock shackles Sunrisers Custom exhaust A shit load of rust |
|
| Author: | Scrawny [ Sun Jul 19, 2009 8:45 pm ] |
| Post subject: | Re: How to weld diffs? |
hardknocks wrote: I was thinking a welded diff would help in tackling the driveway and a better set of rubber . My driveway is 35 degrees at parts , so do you think it's worth it ?
Sounds like a good excuse to modify to me!!! 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|