| auszookers.com https://auszookers.com/forum/ |
|
| Sierra transfer issues https://auszookers.com/forum/viewtopic.php?f=5&t=55701 |
Page 1 of 1 |
| Author: | burls [ Sun Mar 10, 2019 4:27 pm ] |
| Post subject: | Sierra transfer issues |
First test drive after my rollover and l have transfer issues No high two drive No hi or low drive to front diff Any thoughts before l go diving in And yes front hubs locked in |
|
| Author: | jdk81 [ Mon Mar 11, 2019 7:44 am ] |
| Post subject: | Re: Sierra transfer issues |
pull the stick out and check the bush |
|
| Author: | burls [ Mon Mar 11, 2019 7:42 pm ] |
| Post subject: | Re: Sierra transfer issues |
Bush was ok but had the slides lined up to the rear not forward when l put the stick in. What was l thinking |
|
| Author: | bumstein [ Tue Mar 12, 2019 10:10 am ] |
| Post subject: | Sierra transfer issues |
burls wrote: No high two drive No hi or low drive to front diff Might need some more detail here. No high 2 drive? So when it’s in 2wd it doesn’t drive at all? So no drive to the front (which you’d expect) or rear? When it’s in high or low 4 it drives from the rear but not the front? Edit: sorry I just reread this post burls wrote: Bush was ok but had the slides lined up to the rear not forward when l put the stick in. What was l thinking So does that mean you’ve fixed it? |
|
| Author: | burls [ Tue Mar 19, 2019 6:22 am ] |
| Post subject: | Re: Sierra transfer issues |
Yes fixed The problem was when l lined up the selector slides before putting the shifter in, l had them both in the rear position not the forward position. Just not thinking when doing the reassembly. Had me stumped for a bit |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|