Lets water in quicker too
| auszookers.com https://auszookers.com/forum/ |
|
| Adding a hole in airbox for more airflow https://auszookers.com/forum/viewtopic.php?f=5&t=56111 |
Page 1 of 1 |
| Author: | danielparry [ Tue Nov 05, 2019 2:59 pm ] |
| Post subject: | Adding a hole in airbox for more airflow |
This mod has been around for years i did it once on a previous car And it seemed to improve my acceleration abit by adding more air flow, Has anyone tried it on a jimny and did it make any difference |
|
| Author: | MrRocky [ Tue Nov 05, 2019 5:55 pm ] |
| Post subject: | Re: Adding a hole in airbox for more airflow |
Lets water in quicker too
|
|
| Author: | Gwagensteve [ Tue Nov 05, 2019 5:56 pm ] |
| Post subject: | Re: Adding a hole in airbox for more airflow |
I seriously doubt the difference will be detectable, and there's obvious risk of increasing the chance of ingesting mud/water, and raising the temperature of the air entering the engine, which would be a net loss. I have improved the performance of diesels (both turbo and N/A) by reducing inlet restriction, but in that case we were talking about old-school mechanical motors that pulled hot air from the factory. There was plenty of room for improvement. |
|
| Author: | 303zuke [ Tue Nov 05, 2019 8:26 pm ] |
| Post subject: | Re: Adding a hole in airbox for more airflow |
Gwagensteve wrote: .. but in that case we were talking about old-school motors that pulled hot air from the factory. WOW! That's long inlet duct! 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|