| auszookers.com https://auszookers.com/forum/ |
|
| Looking for SJ413P owners manual https://auszookers.com/forum/viewtopic.php?f=5&t=56114 |
Page 1 of 1 |
| Author: | chris77 [ Fri Nov 08, 2019 2:40 am ] |
| Post subject: | Looking for SJ413P owners manual |
Hello I am looking for a copy of the SJ413P owners manual , looking for the information on the weights and limits etc of the cab/chassis around the 1987 year . Any leads let me know . Thanks Chris |
|
| Author: | Gwagensteve [ Fri Nov 08, 2019 6:01 am ] |
| Post subject: | Re: Looking for SJ413P owners manual |
What weight information are you after specifically? |
|
| Author: | chris77 [ Fri Nov 08, 2019 8:10 am ] |
| Post subject: | Re: Looking for SJ413P owners manual |
Any of the vehicle weights , curb weight and gross weight . I doubt it has it but axle weight limits if listed . My registration has a listing of 1390kgs and this is lower than the others which are about 1490 . Cheers Chris |
|
| Author: | Gwagensteve [ Fri Nov 08, 2019 1:33 pm ] |
| Post subject: | Re: Looking for SJ413P owners manual |
I don't have a manual but here's the GVM information for the 4 sierras at my place currently: 1.0 Cab Chassis (Early) 1350kg 1.0 cab chassis (Type 3) 1370kg 1.3 LWB styleside 1390kg now for a red herring: I have a SWB ute here (factory fibreglass ute roof and cab back, factory installed bulkhead) and it's GVM is listed as 1410kg, however, the compliance plate on it identifies it as a carry van, so I wouldn't take the 1410kg seriously at all. I've never seen a figure as high as 1490kg. |
|
| Author: | sideways [ Fri Nov 08, 2019 7:30 pm ] |
| Post subject: | Re: Looking for SJ413P owners manual |
This is the highest official documents I've seen. N.S.W DMT. Probably influenced by Ateco. Attachment: Clipboard01nm,m nmm.jpg Fwiw I think if you've got 1390 on your compliance plate then you're probably pretty buggered trying to change it to anything else unless you're trying to engineer a GVM upgrade. |
|
| Author: | Gwagensteve [ Fri Nov 08, 2019 8:39 pm ] |
| Post subject: | Re: Looking for SJ413P owners manual |
Those figures are wonky as. |
|
| Author: | Brenno [ Fri Nov 08, 2019 8:51 pm ] |
| Post subject: | Re: Looking for SJ413P owners manual |
They are however that's what most engineers go off. Even mine in Tassie is using them as they are approved by our transport dept. |
|
| Author: | Gwagensteve [ Fri Nov 08, 2019 9:07 pm ] |
| Post subject: | Re: Looking for SJ413P owners manual |
Interesting they contradict three of the four Sierra compliance plates I have here and the only one they match is a compliance plate for a carry van attached to a Sierra. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|