Tried that link you gave, came up with:
Bandwidth Limit Exceeded
The server is temporarily unable to service your request due to the site owner reaching his/her bandwidth limit. Please try again later.
| auszookers.com https://auszookers.com/forum/ |
|
| 1986 Sierra Carby Manual https://auszookers.com/forum/viewtopic.php?f=5&t=5620 |
Page 1 of 1 |
| Author: | sneakydust [ Mon Jul 20, 2009 8:05 pm ] |
| Post subject: | 1986 Sierra Carby Manual |
Does anyone know were I can get a pic or diagram or manual or something for a 86 Sierra Carby? If I can see how its meant to look I can see whats missing from mine and what is broken and where. Thanks. |
|
| Author: | paulv [ Mon Jul 20, 2009 8:28 pm ] |
| Post subject: | Re: 1986 Sierra Carby Manual |
I used the Drover manuals on http://www.suzukiinfo.com/ to fix mine. |
|
| Author: | sneakydust [ Mon Jul 20, 2009 8:51 pm ] |
| Post subject: | Re: 1986 Sierra Carby Manual |
Tried that link you gave, came up with: Bandwidth Limit Exceeded The server is temporarily unable to service your request due to the site owner reaching his/her bandwidth limit. Please try again later.
|
|
| Author: | paulv [ Mon Jul 20, 2009 8:58 pm ] |
| Post subject: | Re: 1986 Sierra Carby Manual |
Yep. Just wait for a while and try again. Lots of people download from that site, so it is often like that. I assume you have the Aisin carburettor on yours? |
|
| Author: | sneakydust [ Mon Jul 20, 2009 9:06 pm ] |
| Post subject: | Re: 1986 Sierra Carby Manual |
Yeh good old Aisin lol Do you know if there is much difference in the carbys between the different Sierra year models? cheers |
|
| Author: | paulv [ Mon Jul 20, 2009 9:11 pm ] |
| Post subject: | Re: 1986 Sierra Carby Manual |
I don't know for sure what the differences are, no. I know the US models do not use a Aisin, so any US based manual is no good. I have a 96 coily, and it has a Aisin, that it appears to be fundamentally the same as that described in the Holden Drover manual, although I believe some of the springs/linkages may be slightly different. What makes you think things are missing/broken on yours? |
|
| Author: | royce [ Mon Jul 20, 2009 9:20 pm ] |
| Post subject: | Re: 1986 Sierra Carby Manual |
download section, get teh factory manual from there |
|
| Author: | sneakydust [ Mon Jul 20, 2009 9:27 pm ] |
| Post subject: | Re: 1986 Sierra Carby Manual |
Theres a plastic piece that has clearly been snapped off where the spring controlling the air flap in the carb. So the engine is stalling half way down the accelerator, I assume because the air flap isnt opening/closing properly. There is also a small bar with a little knob on the end just bellow that spring that seems to be not connected to anything or is not functioning properly. It moves freely up and down and slightly side to side and gets stuck up in mid air. This is also cuasing some problems with the auto choke as the engone struggles/stalls when its cold. |
|
| Author: | sneakydust [ Mon Jul 20, 2009 9:30 pm ] |
| Post subject: | Re: 1986 Sierra Carby Manual |
royce wrote: download section, get teh factory manual from there
I have a service manual that I bought for $50, but it decided not to go into detail about carbys. Said that there is to much variation to go into detail about them.
|
|
| Author: | sneakydust [ Wed Jul 22, 2009 5:10 am ] |
| Post subject: | Re: 1986 Sierra Carby Manual |
the outside of my carby is covered in black greasy stuff.. should i try to clean it some how and what would i use to do that? |
|
| Author: | paulv [ Wed Jul 22, 2009 5:13 am ] |
| Post subject: | Re: 1986 Sierra Carby Manual |
Carby cleaner from sprints. The cheap version works fine, otherwise there is the more expensive CRC brand. http://www.crcind.com.au/catalogue.nsf/ ... enDocument |
|
| Author: | paulv [ Wed Jul 22, 2009 5:52 am ] |
| Post subject: | Re: 1986 Sierra Carby Manual |
Have up loaded the Service Manual you need to Wuala. Here: http://www.wuala.com/vickerstek/Service ... series.pdf |
|
| Author: | sneakydust [ Wed Jul 22, 2009 7:56 pm ] |
| Post subject: | Re: 1986 Sierra Carby Manual |
cheers, downloading it now.. hopefuly it'll give me an idea on what exactly is wrong with it |
|
| Author: | sneakydust [ Fri Jul 24, 2009 7:40 pm ] |
| Post subject: | Re: 1986 Sierra Carby Manual |
thanks heaps for that manual paul! finaly got a chance to have a look at it today and was able to fix it. stil don't know how it happened in the first place but it looks good for now.. anyway cheers for the help! xD |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|