| auszookers.com https://auszookers.com/forum/ |
|
| Phillips head and JIS https://auszookers.com/forum/viewtopic.php?f=5&t=56299 |
Page 1 of 1 |
| Author: | Alan [ Tue Feb 11, 2020 12:00 pm ] |
| Post subject: | Phillips head and JIS |
Hi. Bit of info a few people may not realise. Most Japanese vehicles are fitted with JIS screws not phillips heads. A phhillips head screw driver will fit but they are made to "cam out" if the applied torque is to much. Usual results in buggering up the screw head. I bought a set of JIS screwdrivers (not easy to find) but what a difference. No more having to push real hard when undoing a tight screw. Regards Alan Case |
|
| Author: | bumstein [ Tue Feb 11, 2020 1:01 pm ] |
| Post subject: | Re: Phillips head and JIS |
Intriguing!! Be worth looking into!! Where did you find the JIS set? |
|
| Author: | Alan [ Tue Feb 11, 2020 2:12 pm ] |
| Post subject: | Re: Phillips head and JIS |
Hi. The brand was Vessel Megadora from ebay. They came from the US and approx $53 AUD with shipping. Quite a bit of info on the web about the history of phillips heads, ie phillips, posidrive, jis etc. Interesting reading. |
|
| Author: | losfer [ Wed Feb 12, 2020 6:03 pm ] |
| Post subject: | Re: Phillips head and JIS |
Hi alan . you dont happen to watch AVE at all do you? |
|
| Author: | Alan [ Wed Feb 12, 2020 7:27 pm ] |
| Post subject: | Re: Phillips head and JIS |
What is AVE? |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|