| auszookers.com https://auszookers.com/forum/ |
|
| Coily to WT Transfer https://auszookers.com/forum/viewtopic.php?f=5&t=56308 |
Page 1 of 1 |
| Author: | benjamin181991 [ Mon Feb 17, 2020 6:34 pm ] |
| Post subject: | Coily to WT Transfer |
Hey guys, got a WT case to replace the stock coily transfer case. I understand I'll need to also get the mounting arms and jackshaft to complete the conversion. Can anyone who has done this swap confirm I'll 100% need the jackshaft, megazip lists the coily and wt jackshafts as having the same part number? Any help would be greatly appreciated, Thanks. |
|
| Author: | Joe [ Mon Feb 17, 2020 7:31 pm ] |
| Post subject: | Re: Coily to WT Transfer |
This was posted the other day viewtopic.php?f=5&t=56180 I was gunna swap a leafy transfer case into mine years ago but never got around to fitting it but everything that I read on it said it needs leafy jackshaft |
|
| Author: | bron5on [ Tue Feb 18, 2020 7:09 pm ] |
| Post subject: | Re: Coily to WT Transfer |
You need the leafy jack shaft. I bolted a leafy case into my coily a couple of weeks ago. The coily jack shaft is too long. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|