| auszookers.com https://auszookers.com/forum/ |
|
| Grand Vitara Prestige Stereo Install Help https://auszookers.com/forum/viewtopic.php?f=5&t=56354 |
Page 1 of 1 |
| Author: | Bretski [ Mon Mar 30, 2020 12:02 pm ] |
| Post subject: | Grand Vitara Prestige Stereo Install Help |
Hi All. Long time no chat. I’ve done a search with no luck. Need the assistance of the brains trust. Installing a new head unit in the GV. It has steering wheel controls and a factory sub woofer There didn’t seem to be any separate steering wheel control cable nor was there any subwoofer line out from factory head unit. Are the steering controls in the single loom? Does the sub just use high level input from speakers? Or is the whole thing Canbus? And i need special interface. Thanks in advance. |
|
| Author: | atari4x4 [ Mon Mar 30, 2020 3:29 pm ] |
| Post subject: | Re: Grand Vitara Prestige Stereo Install Help |
What year prestige? What style of OEM headunit, hope it's not the garmin? |
|
| Author: | Bretski [ Mon Mar 30, 2020 9:25 pm ] |
| Post subject: | Re: Grand Vitara Prestige Stereo Install Help |
It's the Clarion Headunit ...my09 atari4x4 wrote: What year prestige?
What style of OEM headunit, hope it's not the garmin? |
|
| Author: | atari4x4 [ Tue Mar 31, 2020 11:58 am ] |
| Post subject: | Re: Grand Vitara Prestige Stereo Install Help |
Quite possibly the worst radio fitted to the JB/JT if you're looking at upgrading, from what I've found on the net is that it uses all it's own plugs/wiring. eg no ISO/DIN connectors. Have a search on Suzuki Forums, as there was a bit of info on there. My 2018 had all ISO plugs with the factory fitted Clarion & all I needed was the conversion & steering wheel control loom to swap it out to Kenwood. |
|
| Author: | Bretski [ Sat Apr 11, 2020 9:43 am ] |
| Post subject: | Re: Grand Vitara Prestige Stereo Install Help |
Thanks.... I more worried that mine has the Factory Amp and Subwoofer so not sure if that patch leads will work properly atari4x4 wrote: Quite possibly the worst radio fitted to the JB/JT if you're looking at upgrading, from what I've found on the net is that it uses all it's own plugs/wiring. eg no ISO/DIN connectors. Have a search on Suzuki Forums, as there was a bit of info on there.
My 2018 had all ISO plugs with the factory fitted Clarion & all I needed was the conversion & steering wheel control loom to swap it out to Kenwood. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|