| auszookers.com https://auszookers.com/forum/ |
|
| 09 Grand Vitara rubber grommet https://auszookers.com/forum/viewtopic.php?f=5&t=56355 |
Page 1 of 1 |
| Author: | LewisGrey01 [ Mon Mar 30, 2020 6:44 pm ] |
| Post subject: | 09 Grand Vitara rubber grommet |
Trying to wire up some spotties and I can't figure out how to run the wires through the grommet in the firewall. Tried a piece of wire but couldn't find it under the dash. |
|
| Author: | losfer [ Tue Apr 28, 2020 7:05 pm ] |
| Post subject: | Re: 09 Grand Vitara rubber grommet |
theres only 2 sockets you need to undo to pull the engine harness out through the firewall on the left hand side through the firewall behind the battery tray. drill a small hole and feed your wiring through the grommet. tape that to one of the sockets temporarily , feed it back through , bob is your uncle. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|