auszookers.com
https://auszookers.com/forum/

Super Carry sk410 Timing and Ignition coil wiring.
https://auszookers.com/forum/viewtopic.php?f=5&t=56534		 Page 1 of 1
Author:  pigdog_ [ Mon Jul 27, 2020 8:32 pm ]
Post subject:  Super Carry sk410 Timing and Ignition coil wiring.
Hello all,

I'm trying to get my carry started after having to take the distributor off to replace a gasket. I don't have a manual for my engine, an f10a (1988 Suzuki Super Carry sk410). Now from my research, I think the timing is 8 BDTC but I want to know what people are running.
I also want to know the wiring for the ignition coil, I took it out to test with a voltmeter (The ballast resistor died) and now I'm not exactly sure how it should be wired back in (Should have taken photos) as I can't find the exact diagram for my engine.
Thank you!
Author:  Gwagensteve [ Mon Jul 27, 2020 10:05 pm ]
Post subject:  Re: Super Carry sk410 Timing and Ignition coil wiring.
Never mind about 8 BTDC, it would probably start +/- 30 BTDC, so something is very wrong. Can’t help with wiring, but do you know you have spark?
Author:  pigdog_ [ Tue Jul 28, 2020 4:46 am ]
Post subject:  Re: Super Carry sk410 Timing and Ignition coil wiring.
Gwagensteve wrote:
Never mind about 8 BTDC, it would probably start +/- 30 BTDC, so something is very wrong. Can’t help with wiring, but do you know you have spark?

Managed to get a spark out of the coil last night but still dead when I turn it over
Author:  fordem [ Tue Jul 28, 2020 8:44 pm ]
Post subject:  Re: Super Carry sk410 Timing and Ignition coil wiring.
Image

The above image is taken from a Mini site, but is a typical points style ignition system, with a ballast resistor.

Are you getting spark at the plugs?
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/