Handles same onroad. (i think) Bit like the swaybar mod
No difference.
With my leafs the flex mainly comes from the main leaf pulling and twisting away from the others.
Bend and test them. If you dont like it, You can always bend them back!
| auszookers.com https://auszookers.com/forum/ |
|
| leaf clamps https://auszookers.com/forum/viewtopic.php?f=5&t=5656 |
Page 1 of 1 |
| Author: | nick.gooding [ Wed Jul 22, 2009 2:50 pm ] |
| Post subject: | leaf clamps |
hey guys. Looking to get a bit more flex from my 89 soft toft. I have herd from a few people about opening up the clamps on the leafs. was wondering if this makes much difference and if it handles worst or anything. and how would i do this ? grinder? i have already taken out the load leafs. thanks guys |
|
| Author: | BlueSuzy [ Wed Jul 22, 2009 2:58 pm ] |
| Post subject: | Re: leaf clamps |
I have done it, I just bent them straight up. Not cutting them. Screwdriver/hammer/shifter to bend them. |
|
| Author: | nick.gooding [ Wed Jul 22, 2009 3:50 pm ] |
| Post subject: | Re: leaf clamps |
BlueSuzy wrote: I have done it, I just bent them straight up. Not cutting them.
Screwdriver/hammer/shifter to bend them. thanks mate. did it inprove flex how does it handle now? cheers |
|
| Author: | BlueSuzy [ Wed Jul 22, 2009 4:16 pm ] |
| Post subject: | Re: leaf clamps |
Handles same onroad. (i think) Bit like the swaybar mod No difference.
With my leafs the flex mainly comes from the main leaf pulling and twisting away from the others. Bend and test them. If you dont like it, You can always bend them back!
|
|
| Author: | nick.gooding [ Wed Jul 22, 2009 7:47 pm ] |
| Post subject: | Re: leaf clamps |
Thanks mate i will give it a go. 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|