Found this in a Zook that needed rescuing - could anyone please enlighten me?
Thank you
| auszookers.com https://auszookers.com/forum/ |
|
| What could it be? https://auszookers.com/forum/viewtopic.php?f=5&t=56864 |
Page 1 of 1 |
| Author: | Erik [ Wed Jan 27, 2021 9:59 pm ] |
| Post subject: | What could it be? |
Found this in a Zook that needed rescuing - could anyone please enlighten me? Thank you |
|
| Author: | fordem [ Wed Jan 27, 2021 10:48 pm ] |
| Post subject: | Re: What could it be? |
What's what? I see a picture of what appears to be a 16v G series Suzuki engine - the ignition coils suggest it's from a Baleno, could be a G13 or a G16 - if that's what you're asking about and you need a more definitive identification, go look for the engine number, should be near the bellhousing. |
|
| Author: | Erik [ Wed Jan 27, 2021 10:53 pm ] |
| Post subject: | Re: What could it be? |
Thank you - didn't have time to get the number as it was getting dark before I had to choose to buy it or not and whether it was worth it. It's a G16 but you identified it by the ignition coils - Thanks, now I know. A moot subject really as it's already in and plated since 2013 - just nice to know. Thanks again |
|
| Author: | rexhunta [ Thu Jan 28, 2021 6:38 am ] |
| Post subject: | Re: What could it be? |
Agree, it's a baleno g16b by the external coilpacks and forward facing plenum. Different type of setup with the fuel surge tank sitting so far up in the engine bay though, i'd be putting a different fuel pump on it, change the fuel lines and remove the tank. |
|
| Author: | MrRocky [ Thu Jan 28, 2021 7:29 am ] |
| Post subject: | Re: What could it be? |
Ive only ever seen rocker mounted coilpacks on balenos or dizzy type earlier models. The g16b (or just the coilpacks) pictured looks like it may have come out of a x-90 i believe thay ran the coilpacks on the firewall like that It does look like a baleno intake and the thermostat housing would appear to be at the rear of the head. |
|
| Author: | fordem [ Thu Jan 28, 2021 11:59 am ] |
| Post subject: | Re: What could it be? |
Based on the parts catalogs, it appears the X-90s all had distributors. |
|
| Author: | MrRocky [ Thu Jan 28, 2021 1:34 pm ] |
| Post subject: | Re: What could it be? |
How odd def seen 2 with that coil setup |
|
| Author: | Gwagensteve [ Thu Jan 28, 2021 5:16 pm ] |
| Post subject: | Re: What could it be? |
Agree. I have never seen coil pack X-90. |
|
| Author: | Gwagensteve [ Thu Jan 28, 2021 5:24 pm ] |
| Post subject: | Re: What could it be? |
google agrees too - couldn't find an engine bay photo of a coil pack motor in an X90. |
|
| Author: | MrRocky [ Thu Jan 28, 2021 6:34 pm ] |
| Post subject: | Re: What could it be? |
Anyone seen a baleno with that coil arrangement ? |
|
| Author: | Gwagensteve [ Thu Jan 28, 2021 7:02 pm ] |
| Post subject: | Re: What could it be? |
Yep. Pretty common. In a baleno they’re mounted to the head above the cam angle sensor. |
|
| Author: | MrRocky [ Thu Jan 28, 2021 9:12 pm ] |
| Post subject: | Re: What could it be? |
Yeah ive seen them mounted on the rocker cover in balenos but only ever seen them on the firewalls of x90 |
|
| Author: | Erik [ Thu Jan 28, 2021 9:24 pm ] |
| Post subject: | Re: What could it be? |
Thanks everybody - it's nice to know what I'll be working on. It's in this so wish me luck |
|
| Author: | Erik [ Thu Jan 28, 2021 9:46 pm ] |
| Post subject: | Re: What could it be? |
Oh, and it has a mystery box....
|
|
| Author: | MrRocky [ Thu Jan 28, 2021 10:10 pm ] |
| Post subject: | Re: What could it be? |
Ems stinger or just an amp ? |
|
| Author: | Erik [ Thu Jan 28, 2021 10:16 pm ] |
| Post subject: | Re: What could it be? |
I hope it's a Di-lithium Crystal Time Dilator Module But labelled ST48019293 it's probably a crappy ECU made for horses circa 1738 shame |
|
| Author: | MrRocky [ Thu Jan 28, 2021 10:18 pm ] |
| Post subject: | Re: What could it be? |
Decent ecu |
|
| Author: | Erik [ Thu Jan 28, 2021 10:22 pm ] |
| Post subject: | Re: What could it be? |
Really? Please, tell me more... thanks |
|
| Author: | Erik [ Thu Jan 28, 2021 10:24 pm ] |
| Post subject: | Re: What could it be? |
just got the pic and now understand your question.... will research Have you had any experience with these? If so what makes them good? Thanks again |
|
| Author: | MrRocky [ Thu Jan 28, 2021 10:26 pm ] |
| Post subject: | Re: What could it be? |
Full engine management system (ems) i used to run them on vl turbo comodoores. About 2k installed and tuned Still reasonably common in aus, most performance shops sell as cheaper option to haltech. |
|
| Author: | Erik [ Thu Jan 28, 2021 10:35 pm ] |
| Post subject: | Re: What could it be? |
Faaark! Great info, cheers. Just watched this from 2007 https://www.youtube.com/watch?v=xw1k3Ul9evc |
|
| Author: | Erik [ Thu Jan 28, 2021 11:39 pm ] |
| Post subject: | Re: What could it be? |
It also came with this poor creature... |
|
| Author: | rexhunta [ Fri Jan 29, 2021 8:44 am ] |
| Post subject: | Re: What could it be? |
MrRocky wrote: Anyone seen a baleno with that coil arrangement ? Yep I had one. 98 model. 
|
|
| Author: | MrRocky [ Fri Jan 29, 2021 12:13 pm ] |
| Post subject: | Re: What could it be? |
Ahhh one could assume they must be a crossover model of sorts on the jump from dizzy baleno to rocker mounted coil packs. Much like the 88.5 model sierra |
|
| Author: | Erik [ Thu Feb 04, 2021 10:39 pm ] |
| Post subject: | Re: What could it be? |
MrRocky wrote: Full engine management system (ems) i used to run them on vl turbo comodoores. About 2k installed and tuned Still reasonably common in aus, most performance shops sell as cheaper option to haltech. You wouldn't still happen to have a copy of the Software to run it would you? |
|
| Author: | MrRocky [ Fri Feb 05, 2021 9:33 am ] |
| Post subject: | Re: What could it be? |
The software is licensed Tuning shops pay a fair bit of coin for it Unless your very competent in tuning ecu software its not a job for the diy |
|
| Author: | Erik [ Fri Feb 05, 2021 7:03 pm ] |
| Post subject: | Re: What could it be? |
MrRocky wrote: The software is licensed Tuning shops pay a fair bit of coin for it Unless your very competent in tuning ecu software its not a job for the diy Thanks, understood. As I have no idea of the history, etc. I shall just tear the whole vehicle down and start again. The body needs work and the more I look, the more I shudder. Should I just get a stock ECU and loom to rebuild and get it going, then use the Stinger later if required? The engine is probably cactus anyways and the current 'wiring' is an unknown entity. Boomshanka |
|
| Author: | Erik [ Mon Feb 15, 2021 9:11 pm ] |
| Post subject: | Re: What could it be? |
MrRocky wrote: The software is licensed Tuning shops pay a fair bit of coin for it Unless your very competent in tuning ecu software its not a job for the diy I came accross an old post about G16B conversion harnesses - do you still make them MrRocky? How would I go about finding the correct computer for the engine?
|
|
| Author: | MrRocky [ Tue Feb 16, 2021 7:51 am ] |
| Post subject: | Re: What could it be? |
Nah i dont have time for that stuff these days, people always seemed to try and change my harnesses by removing the fuse box to "improve" it and there car never runs right again then they spend big bucks chasing problems they have created  too much hassle
|
|
| Author: | Erik [ Wed Feb 17, 2021 8:13 pm ] |
| Post subject: | Re: What could it be? |
MrRocky wrote: Nah i dont have time for that stuff these days, people always seemed to try and change my harnesses by removing the fuse box to "improve" it and there car never runs right again then they spend big bucks chasing problems they have created too much hassleDon't blame you mate |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|