| Author |
Message |
buzbox
Joined: Thu Jul 16, 2009 11:30 pm Posts: 3600 Location: Wollongong NSW
Vehicle: LWB Sierra & XL7
|
 Posted: Sun Jul 26, 2009 4:55 pm |
|
|
I'm just having a little trouble with the power windows in the Vitara. After pulling out the passanger side window motor, I found that the wire that pulls the window up and down was jammed in the spool preventing the window to go up or down. I pulled the wire out and ready to re-assemble, but here's where I got stuck.
I thought I'd check that the motor isn't stuffed before putting it back together, So I tested it on the driver's side connection and works fine, I recconect it to the passanger side and it strugles to move.
Seems like it isn't getting enough power to operate, but it works just fine.
Any ideas on why this is happeneing?
|
|
|
|
 |
eldo

az supporter
Joined: Sat May 30, 2009 11:30 pm Posts: 2770 Location: sunny coast
Vehicle: jimny
|
 Posted: Sun Jul 26, 2009 5:14 pm |
|
|
trace the wire back, probably a dirty connection further in. did you bypass the switch? isolate that and see if that fixes it. also try putting a multimeter on to it, i have one if you need to borrow one
|
|
|
|
 |
unique_seek
Joined: Mon Feb 16, 2009 10:30 pm Posts: 537 Location: Sunny Coast
|
 Posted: Sun Jul 26, 2009 6:17 pm |
|
|
sounds to me like your meck is stuffed!you sure it wasn't damaged when the wire got jammed in the spool?I would be checking the wire ect before you burn out the motor!
_________________ Coily GTI Turbo...thats right its a coily!!
|
|
|
|
 |
buzbox
Joined: Thu Jul 16, 2009 11:30 pm Posts: 3600 Location: Wollongong NSW
Vehicle: LWB Sierra & XL7
|
 Posted: Sun Jul 26, 2009 9:32 pm |
|
I cleaned the plugs and connections while i had it off, So I don't think it's because of that. I've posted emails to a few suzuki wreckers to see how much a new one would be. What a cuntry of a job it is, I'm starting to think it would be easier to replace the whole door. 
|
|
|
|
 |
oscar
Joined: Thu Jul 06, 2006 11:30 pm Posts: 911 Location: Ipswich
|
 Posted: Mon Jul 27, 2009 1:14 am |
|
|
when u checked it in passenger side was it mounted?
_________________ [img]http://www.nbs4x4club.com/forum/files/thumbs/
|
|
|
|
 |
buzbox
Joined: Thu Jul 16, 2009 11:30 pm Posts: 3600 Location: Wollongong NSW
Vehicle: LWB Sierra & XL7
|
 Posted: Mon Jul 27, 2009 2:06 am |
|
|
No not properly mounted. I've managed to prop it up with a bit of wire and cable tie's before it started raining. Might drop it off to the mechanics to sort out...
|
|
|
|
 |
oscar
Joined: Thu Jul 06, 2006 11:30 pm Posts: 911 Location: Ipswich
|
 Posted: Mon Jul 27, 2009 2:09 am |
|
|
lube up the tracts and mount it prperly and give it another go
_________________ [img]http://www.nbs4x4club.com/forum/files/thumbs/
|
|
|
|
 |
buzbox
Joined: Thu Jul 16, 2009 11:30 pm Posts: 3600 Location: Wollongong NSW
Vehicle: LWB Sierra & XL7
|
 Posted: Mon Jul 27, 2009 3:49 pm |
|
Quote: I can supply a new LH Front Regulator for $ 165.00 plus postage of $ 20.00
Patrick Discount Suzi Spares And from Suzifour Quote: passanger side elec reg for 2 door car or a 4 door car
2 door reg elec $120.00 4 door $125.00
There's no difference to the 2 & 4 door is there?
|
|
|
|
 |
|