| auszookers.com https://auszookers.com/forum/ |
|
| RD208 ARB locker i https://auszookers.com/forum/viewtopic.php?f=5&t=57043 |
Page 1 of 1 |
| Author: | fire60 [ Wed Aug 25, 2021 8:22 am ] |
| Post subject: | RD208 ARB locker i |
Does anyone know if the ARB RD208 locker will fit into a steel front 3rd member. It looks like there is not enough clearance in the crown wheel side for the carrier to fit. Pete |
|
| Author: | fire60 [ Wed Aug 25, 2021 8:24 am ] |
| Post subject: | Re: RD208 ARB locker i |
Sorry should have said, this is a 95 Vitara. I think the steel 3rd is out of a GV Vit. It had the vacuum actuator originally. |
|
| Author: | Gwagensteve [ Thu Aug 26, 2021 10:30 am ] |
| Post subject: | Re: RD208 ARB locker i |
There is some fairly detailed tech on this on the forum. Sorry to be the “do a search” guy but I was skimming through some discussion about this in the last few months. I can’t quote the thread off the top of my head as vitara from stuff is only of passing interest to me but I’m confident the answer is here to be found. |
|
| Author: | tanshi [ Fri Aug 27, 2021 2:50 pm ] |
| Post subject: | Re: RD208 ARB locker i |
viewtopic.php?f=5&t=56979&hilit=rd208+gv+steel+diff |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|