auszookers.com
https://auszookers.com/forum/

CLUTCH *vitara engine in sierra*
https://auszookers.com/forum/viewtopic.php?f=5&t=5709		 Page 1 of 1
Author:  Verm1n [ Sun Jul 26, 2009 5:33 pm ]
Post subject:  CLUTCH *vitara engine in sierra*
yes yes i know... I like the smell of my own clutch but
seeing I'm swapping engines from the g16a back to the g16b
I thought I'd get a newer heavy duty clutch

can anyone recommend what they have used and how much
I'd b looking around to pay for one ???
Author:  shep [ Sun Jul 26, 2009 5:35 pm ]
Post subject:  Re: CLUTCH *vitara engine in sierra*
unless you like changing clutch cables don't put a heavy duty clutch in it.
Author:  unique_seek [ Sun Jul 26, 2009 6:13 pm ]
Post subject:  Re: CLUTCH *vitara engine in sierra*
Ring NPC CLUTCHES(archerfield)!!!!they are so switched on!highly recomened!I got a modified heavyduty clutch to suit my turbo sierra,i think it cost the $250-$300(around there) and that included couriering it to me!
Author:  Verm1n [ Sun Jul 26, 2009 8:18 pm ]
Post subject:  Re: CLUTCH *vitara engine in sierra*
i replaced the clutch bout 6mnths ago when we put the g16a
its either rooted or there oil on it

Shep
i think i'd rather change the clutch cable a few times rather
than the clutch... what clutch wood u recommend?..

unique_seek
oh kk i work at Archerfield.. soo i mite track them down n'
have a look and get there opinion too
Author:  zookster666 [ Mon Jul 27, 2009 2:32 am ]
Post subject:  Re: CLUTCH *vitara engine in sierra*
They are on boundary road archerfield. Used them through work a few times very helpfull and know what they are talking about.

jesse
Author:  shep [ Mon Jul 27, 2009 3:06 am ]
Post subject:  Re: CLUTCH *vitara engine in sierra*
i did 3 cables in one weekend that was a heavy duty RPM piece of shit

i put a standard clutch back in and have had no problems. i also tow heavy
trailers where there are no roads with no dramas. i have a 1.6 with sierra clutch.
Author:  11_evl [ Mon Jul 27, 2009 3:52 pm ]
Post subject:  Re: CLUTCH *vitara engine in sierra*
shep wrote:
i did 3 cables in one weekend that was a heavy duty RPM piece of shit
i put a standard clutch back in and have had no problems. i also tow heavy
trailers where there are no roads with no dramas. i have a 1.6 with sierra clutch.
Author:  Saam [ Mon Jul 27, 2009 3:53 pm ]
Post subject:  Re: CLUTCH *vitara engine in sierra*
i have had no issues with me exedy tough clutch never even looked at needing to replace the cable
Author:  Buddy [ Mon Jul 27, 2009 7:28 pm ]
Post subject:  Re: CLUTCH *vitara engine in sierra*
If you have an aftermarket transfer gear set a near standard clutch should be OK. I have a G16A with Weber 32/32, mild cam and headers that is just fine utilising an Exedy 1.3 clutch. Nice pedal, nice grip and nice price from ABS. I run 31s, 5.14 transfer and 3.9 diffs.
Author:  Verm1n [ Mon Jul 27, 2009 8:53 pm ]
Post subject:  Re: CLUTCH *vitara engine in sierra*
today i went around to a few different places for prices
repco- 1.3 standard $140
autobarn- 1.3 excedy $180
supercheap- 1.3 standard $99
all brake & clutch supplies- 1.3 standard $220
- 1.3 excedy $349


zookster666
thanks, I'll check them out tomorrow afternoon after work

shep
thanks, I prob will go wit a standard clutch, just get gears

Saam
thanks, i'll still keep it in mind as i do want something that will last until i get gears

Buddy
Thanks, I'm not too sure but in the end i will get gears for it, i run 31's wit 3.9... i believe i still have a 1ltr transfer case though with no gears
Author:  Verm1n [ Mon Jul 27, 2009 8:54 pm ]
Post subject:  Re: CLUTCH *vitara engine in sierra*
IS THERE ANY DIFFERENCE BETWEEN A 1LT F10A GEARBOX & CLUTCH COMPARED TO A G13A GEARBOX & CLUTCH??
Author:  Highway-Star [ Mon Jul 27, 2009 8:59 pm ]
Post subject:  Re: CLUTCH *vitara engine in sierra*
Verm1n wrote:
today i went around to a few different places for prices
repco- 1.3 standard $140
autobarn- 1.3 excedy $180
supercheap- 1.3 standard $99
all brake & clutch supplies- 1.3 standard $220
- 1.3 excedy $349



Bailey's brake and Clutch (mining street Bundamba):
Excedy clutch kit, with new spigot bearing, and new throwout bearing = $195.
Thats what My dad bought about a month ago.

Yeah the guys at NPC (Archerfield) do know their clutches quite well, they made up the hybrid job for the Hilux.
Author:  Verm1n [ Mon Jul 27, 2009 9:02 pm ]
Post subject:  Re: CLUTCH *vitara engine in sierra*
Highway-Star
Cheers, for that :)
Author:  Verm1n [ Mon Jul 27, 2009 10:22 pm ]
Post subject:  Re: CLUTCH *vitara engine in sierra*
oh kk.. i done some researching on clutches... each clutch obviously fits each gearbox of the clutch...

a clutch for the f10 is 180mm by 20.3 spline by 18 teeth
a clutch for the g13 is 190mm by 22.4 spline by 20 teeth
a clutch for the g16 is 215mm by 22.75 spline by 20 teeth
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/