| auszookers.com https://www.auszookers.com/forum/ |
|
| 98 coily Sierra and 98 Jimny radius arms https://www.auszookers.com/forum/viewtopic.php?f=5&t=57181 |
Page 1 of 1 |
| Author: | nzzooker [ Fri Feb 04, 2022 10:18 am ] |
| Post subject: | 98 coily Sierra and 98 Jimny radius arms |
I have a 98 coily I'd love to know if the 98 coily and 98 jimny share the same geometry for their radius arms! Thanks |
|
| Author: | Beery [ Fri Feb 04, 2022 11:27 am ] |
| Post subject: | Re: 98 coily Sierra and 98 Jimny radius arms |
I believe front arms are the same, I'm 80% sure I fitted a set of front radius arms from a jimny to my old coily after bending them, because finding coily specific arms was near impossible. That was a while ago, i'm sure someone will correct me if that's wrong. I believe the rears are different (longer?) |
|
| Author: | Reubs [ Fri Feb 04, 2022 11:50 am ] |
| Post subject: | Re: 98 coily Sierra and 98 Jimny radius arms |
I can confirm the front radius arms will be the same. Only difference I noticed was Jimny front radius arms have 2 tapped holes for the vacuum line along the arm. I had Jimny ones on a 'coily' Sierra many years ago as they were easy to come by with good rubber bushes at the time. |
|
| Author: | suzukitas [ Sun Feb 06, 2022 11:58 pm ] |
| Post subject: | Re: 98 coily Sierra and 98 Jimny radius arms |
Correct fronts are a direct swap in, but rears are a very different profile and wont swap either way. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|