Took the car to the mechanics and found what the problem was.
It wasnt the transmission it was my universal joint in my drivshaft.
so im up for a new drivshaft
| auszookers.com https://auszookers.com/forum/ |
|
| transmission rattle https://auszookers.com/forum/viewtopic.php?f=5&t=5723 |
Page 1 of 1 |
| Author: | nick.gooding [ Mon Jul 27, 2009 2:54 pm ] |
| Post subject: | transmission rattle |
Just yeaterday my car started to rattle r eally loud. when its out of gear and i rev it its fine, but when driving and changing gears its really lud and sounds like its grinding even when its in gear. Hopefully wont need a new gear box? Anyone Know Thanks guys. |
|
| Author: | nick.gooding [ Tue Jul 28, 2009 1:16 pm ] |
| Post subject: | Re: transmission rattle |
Took the car to the mechanics and found what the problem was. It wasnt the transmission it was my universal joint in my drivshaft. so im up for a new drivshaft
|
|
| Author: | want33s [ Tue Jul 28, 2009 1:50 pm ] |
| Post subject: | Re: transmission rattle |
At least you know what a crook uni feels/sounds like now 
|
|
| Author: | Rockhopper [ Tue Jul 28, 2009 9:19 pm ] |
| Post subject: | Re: transmission rattle |
nick.gooding wrote: Took the car to the mechanics and found what the problem was.
It wasnt the transmission it was my universal joint in my drivshaft. so im up for a new drivshaft Better a new driveshaft than a new gearbox
|
|
| Author: | foolsp33d [ Tue Jul 28, 2009 9:59 pm ] |
| Post subject: | Re: transmission rattle |
yep had this happen recently to.. out of curiosity.. was it the input shaft uni!?? mine was.. the C clip decided to go awol, and the uni cap tried doing the same.. lucky the gearbox had a different idea and stood its ground...while copping a grinding.. ouch 
I put the new uni in and noticed a lil bit of slack once the clips were in so im going to have to tear it out soon and swap it for the WT one iv got sitting as a spare... fwiw if one has gone.. its probably adviseable to replace the rest of em
|
|
| Author: | nick.gooding [ Thu Jul 30, 2009 1:45 pm ] |
| Post subject: | Re: transmission rattle |
foolsp33d wrote: yep had this happen recently to.. out of curiosity.. was it the input shaft uni!?? mine was.. the C clip decided to go awol, and the uni cap tried doing the same.. lucky the gearbox had a different idea and stood its ground...while copping a grinding.. ouch
I put the new uni in and noticed a lil bit of slack once the clips were in so im going to have to tear it out soon and swap it for the WT one iv got sitting as a spare... fwiw if one has gone.. its probably adviseable to replace the rest of em Sorry mate, i have no idea what the difference is, im not all that mechnical only had a car for 4months 
But its around 400mm |
|
| Author: | nick.gooding [ Thu Jul 30, 2009 1:46 pm ] |
| Post subject: | Re: transmission rattle |
foolsp33d wrote: yep had this happen recently to.. out of curiosity.. was it the input shaft uni!?? mine was.. the C clip decided to go awol, and the uni cap tried doing the same.. lucky the gearbox had a different idea and stood its ground...while copping a grinding.. ouch
I put the new uni in and noticed a lil bit of slack once the clips were in so im going to have to tear it out soon and swap it for the WT one iv got sitting as a spare... fwiw if one has gone.. its probably adviseable to replace the rest of em Sorry mate, i have no idea what the difference is, im not all that mechnical only had a car for 4months
But its around 400mm |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|