| auszookers.com https://auszookers.com/forum/ |
|
| Vitara Transfercase https://auszookers.com/forum/viewtopic.php?f=5&t=5726 |
Page 1 of 1 |
| Author: | RIKSTR [ Mon Jul 27, 2009 8:32 pm ] |
| Post subject: | Vitara Transfercase |
I have a Transfercase that has crawler gear in it but the output shafts have been played with to put flanges on them. I also have a spare so I am going to try to make one I can use in my Vit. Does anyone know if the output shafts can be replaced by pulling the chain drive section of the back or do I need to strip the t-case right down. |
|
| Author: | joeblow [ Mon Jul 27, 2009 8:41 pm ] |
| Post subject: | Re: Vitara Transfercase |
you'll have to strip it right down. the output shaft is very long. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|