| auszookers.com https://auszookers.com/forum/ |
|
| Replacing head on G13BA engine with G16A head https://auszookers.com/forum/viewtopic.php?f=5&t=57510 |
Page 1 of 1 |
| Author: | 1991sierra [ Thu May 11, 2023 6:41 pm ] |
| Post subject: | Replacing head on G13BA engine with G16A head |
The head on my g13ba engine is no good and the only head I can track down is from a g16a. Will this work? If so what other parts/gaskets from the g16a will i need? Thanks |
|
| Author: | HarryHoudini [ Fri May 12, 2023 9:30 am ] |
| Post subject: | Re: Replacing head on G13BA engine with G16A head |
Welcome......best to talk to someone that has done the conversion,however someone on here should have a good spare 13BA Head. |
|
| Author: | losfer [ Fri May 12, 2023 6:45 pm ] |
| Post subject: | Re: Replacing head on G13BA engine with G16A head |
you can use the g16a head , but you will also need the g16a fuel pump. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|