auszookers.com
https://auszookers.com/forum/

98 coily diff
https://auszookers.com/forum/viewtopic.php?f=5&t=5780		 Page 1 of 1
Author:  NT_TOM [ Thu Jul 30, 2009 3:23 pm ]
Post subject:  98 coily diff
Hey, im sure it has been posted before but my computer is being gay,

I have a 98 coily and i bought it with a f***** front diff, i got told its a 3.9? What lockers fit? i dont want a arb air locker as they cost more than my car
Author:  tanshi [ Thu Jul 30, 2009 3:25 pm ]
Post subject:  Re: 98 coily diff
The jimny front can be made to fit, but there are modifications that need to be made. other wise weld it.
Author:  NT_TOM [ Thu Jul 30, 2009 3:32 pm ]
Post subject:  Re: 98 coily diff
How hard is it o get to fit? and what mods?

i would weld it but this is all i have::


Image
Image
Author:  atari4x4 [ Thu Jul 30, 2009 4:06 pm ]
Post subject:  Re: 98 coily diff
hmm welding definitely doesn't look like an option...
Author:  TASSIETOYUKI [ Thu Jul 30, 2009 4:35 pm ]
Post subject:  Re: 98 coily diff
Nope, that is farked (technical term of course :wink: )
Author:  NT_TOM [ Thu Jul 30, 2009 4:51 pm ]
Post subject:  Re: 98 coily diff
yeah i think i might be missing some bits
Author:  shep [ Thu Jul 30, 2009 5:10 pm ]
Post subject:  Re: 98 coily diff
anyone know if a real sierra carrier will fit the coily R&P?
i will be in darwin next week and can drop one off if it will fit.
post a pickie of your car, it has the biggest guard chop ive seen. :lol:
Author:  joeblow [ Thu Jul 30, 2009 5:18 pm ]
Post subject:  Re: 98 coily diff
shep wrote:
anyone know if a real sierra carrier will fit the coily R&P?
i will be in darwin next week and can drop one off if it will fit.
post a pickie of your car, it has the biggest guard chop ive seen. :lol:


yes, rear only though.
Author:  shep [ Thu Jul 30, 2009 5:35 pm ]
Post subject:  Re: 98 coily diff
joeblow wrote:
shep wrote:
anyone know if a real sierra carrier will fit the coily R&P?
i will be in darwin next week and can drop one off if it will fit.
post a pickie of your car, it has the biggest guard chop ive seen. :lol:


yes, rear only though.


looks like you need a coily front diff then mate. good luck its hard enough
getting bits for a leafie up here.
Author:  atari4x4 [ Thu Jul 30, 2009 6:12 pm ]
Post subject:  Re: 98 coily diff
freight wouldn't be more than $50 if you do find one interstate.
Author:  paulv [ Thu Jul 30, 2009 6:18 pm ]
Post subject:  Re: 98 coily diff
Who do you use for freight? $50 is good for something as heavy as a diff.

I tend to get quoted horrendous prices for freight for anything over about 20 kgs.
Author:  atari4x4 [ Thu Jul 30, 2009 6:39 pm ]
Post subject:  Re: 98 coily diff
paulv wrote:
Who do you use for freight? $50 is good for something as heavy as a diff.

I tend to get quoted horrendous prices for freight for anything over about 20 kgs.


I don't know, it's just the centre I doubt it would weigh more that 20kgs?

I've had diff parts shipped from all over aus & the most I paid was $50 for a steel front diff housing & carrier from QLD, from memory I paid $25 to $30 for freight on a complete centre shipped from west mexico (WA)
Author:  NT_TOM [ Thu Jul 30, 2009 7:36 pm ]
Post subject:  Re: 98 coily diff
Bummer, you can check my guard chop in the rides section. Anybody know where i could get hold of a diff?
Author:  dank [ Thu Jul 30, 2009 9:39 pm ]
Post subject:  Re: 98 coily diff
Anything up to 20kg and Auspost is by far the cheapest. There are limitations on dimensions though.
Author:  Saam [ Fri Jul 31, 2009 1:50 am ]
Post subject:  Re: 98 coily diff
i have a coily rear with a smashed pinion but no front :( it's freakin hard to get bits for them thats why i have straightened my diff housings so many times lol
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/