| auszookers.com https://auszookers.com/forum/ |
|
| Replacing the floor https://auszookers.com/forum/viewtopic.php?f=5&t=57921 |
Page 1 of 1 |
| Author: | pastr [ Thu Jul 17, 2025 4:12 am ] |
| Post subject: | Replacing the floor |
I have 1998 soft top samurai I have found a lot of holes in the front floor left and right. On the net I found sites that sale new floor for left and right sides but up to 1995 (American)! Not sure if this floor is front till back or there is floor just for the front? And, does the 1995 fit the 1998 or there is site that sale 96-98 floor? Thanks |
|
| Author: | Andygoodbloke [ Mon Jul 28, 2025 7:56 pm ] |
| Post subject: | Re: Replacing the floor |
I would look for Suzuki parts from India, or the same vehicle made by them. - Murati or something like that, unless you can find one near you which is in a better state - good luck They do advertise on Ebay too I got a replacement front end that was guards and front and it bolted straight on Thanks Andy |
|
| Author: | Jezzer [ Tue Jul 29, 2025 9:45 am ] |
| Post subject: | Re: Replacing the floor |
There is differences in the floors between a leaf spring and the the coil spring models. I know the seat mounts are different not sure on the foot well part. How bad is it. Ie it a few patches needed or does the whole thing need replacing. Sent from my iPhone using Tapatalk |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|