| auszookers.com https://auszookers.com/forum/ |
|
| 1L gears to make a S1 https://auszookers.com/forum/viewtopic.php?f=5&t=58 |
Page 1 of 1 |
| Author: | steve [ Fri Jun 23, 2006 11:03 am ] |
| Post subject: | 1L gears to make a S1 |
Just saw something about this again and remembered i have a set of 1L gears which are used. I've had some explanations from a few people but always got confused 
Do you need 1 standard 1.3L transfer and these gears pictured? or do you need more bits from other cases to make a S1 transfer case? |
|
| Author: | royce [ Fri Jun 23, 2006 11:37 am ] |
| Post subject: | Re: 1L gears to make a S1 |
you need a set of late 1 litre gears, a 1.3 flange needs to be able to be fitted to that spline bit then you get the gear that has the 2 gears as one and cut it in half and join the 2 bits from both gearsets together, if you compare to some 1.3 gears youll see how it would work |
|
| Author: | royce [ Fri Jun 23, 2006 1:43 pm ] |
| Post subject: | Re: 1L gears to make a S1 |
http://global.level1.com/products1.php?Id=10 thats a pretty good link to how it works |
|
| Author: | steve [ Fri Jun 23, 2006 4:22 pm ] |
| Post subject: | Re: 1L gears to make a S1 |
yeah? i dunno, looks like a bunch of routers to me 
|
|
| Author: | royce [ Fri Jun 23, 2006 4:32 pm ] |
| Post subject: | Re: 1L gears to make a S1 |
|
http://ironbark.bendigo.latrobe.edu.au/~jeff/xfer2.htm |
|
| Author: | steve [ Fri Jun 23, 2006 4:38 pm ] |
| Post subject: | Re: 1L gears to make a S1 |
cool 
|
|
| Author: | oscar [ Sat Jul 08, 2006 12:35 am ] |
| Post subject: | Re: 1L gears to make a S1 |
i want this lobster |
|
| Author: | Cruzer! [ Sat Aug 05, 2006 11:01 pm ] |
| Post subject: | Re: 1L gears to make a S1 |
i was looking at doing this, still considering it, only problem i've got is trying to figure out whether the modified idler gear set will be strong enough to not break when using it... |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|