| auszookers.com https://auszookers.com/forum/ |
|
| '94 Imported G16A MPFI Wiring Diagram https://auszookers.com/forum/viewtopic.php?f=5&t=6160 |
Page 1 of 1 |
| Author: | JrZook [ Sat Aug 22, 2009 3:49 pm ] |
| Post subject: | '94 Imported G16A MPFI Wiring Diagram |
Gday guys, Just trying to diagnose some possible wiring problems (over the phone  ) and unfortunately cant seem to access the wiring diagrams off suzuki info site.
Anyway was wondering if anyone had a wiring diagram for a import G16A MPFI. Pretty sure its around a '94 model with the early 'cone' style airflow meter. Cheers Dan |
|
| Author: | steak_knife [ Sat Aug 22, 2009 5:32 pm ] |
| Post subject: | Re: '94 Imported G16A MPFI Wiring Diagram |
i can`t see that thay would be much different, what problem you chasing? Steve |
|
| Author: | JrZook [ Sat Aug 22, 2009 9:11 pm ] |
| Post subject: | Re: '94 Imported G16A MPFI Wiring Diagram |
steknig wrote: i can`t see that thay would be much different, what problem you chasing?
Steve Well my rig is at home (1800k's away) and dad is having a few dramas with getting her to fire up. So instead of guessing i reckon it would be easier if i had a wiring diagram physically in front of me. I dont have one here. Cheers Dan |
|
| Author: | Scrawny [ Sat Aug 22, 2009 9:21 pm ] |
| Post subject: | Re: '94 Imported G16A MPFI Wiring Diagram |
Have you had a hunt through here? Not sure if it has what you need but might be helpful |
|
| Author: | JrZook [ Thu Aug 27, 2009 3:17 pm ] |
| Post subject: | Re: '94 Imported G16A MPFI Wiring Diagram |
ScrawnC wrote: Have you had a hunt through here? Not sure if it has what you need but might be helpful
Cheers for that mate, but unfortunalty they only have the later model ecu in there (4 plug). Anyone else got a diagram? |
|
| Author: | Taff [ Fri Aug 28, 2009 1:48 am ] |
| Post subject: | Re: '94 Imported G16A MPFI Wiring Diagram |
This one? |
|
| Author: | steak_knife [ Fri Aug 28, 2009 1:54 am ] |
| Post subject: | Re: '94 Imported G16A MPFI Wiring Diagram |
Fark me!! I wish the gti diag looked that easy!! 
|
|
| Author: | JrZook [ Fri Aug 28, 2009 2:55 pm ] |
| Post subject: | Re: '94 Imported G16A MPFI Wiring Diagram |
Thanks a heap Taff! That's what i was looking for! |
|
| Author: | JrZook [ Fri Aug 28, 2009 6:11 pm ] |
| Post subject: | Re: '94 Imported G16A MPFI Wiring Diagram |
Just got a couple of Qs for anyone in the know from the above wiring diagram. What have people done with the following wires ie, just cut them, tied to ground or tied to 12V? A22 (A/T) inhibitor switch A8 A/C circuit (no A/C) A18(A/T) A/T control circuit B10(A/T) A/T control circuit Regards Dan |
|
| Author: | want33s [ Fri Aug 28, 2009 10:50 pm ] |
| Post subject: | Re: '94 Imported G16A MPFI Wiring Diagram |
My Vitara loom had more wires than needed in a sierra and they have all been removed from the engine bay harness. So option ONE.. Just cut them. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|