Yep sure will mate. Only thing is maybe you may need to change the flanges over. That's not a worry anyway.
| auszookers.com https://auszookers.com/forum/ |
|
| 1.3 drover motor into 84 sierra https://auszookers.com/forum/viewtopic.php?f=5&t=6231 |
Page 1 of 1 |
| Author: | 84zuk [ Wed Aug 26, 2009 1:39 am ] |
| Post subject: | 1.3 drover motor into 84 sierra |
hi all just wondering if a holden drover 1.3lt motor and gearbox will fit into a 1984 model sierra? cheers |
|
| Author: | zookster666 [ Wed Aug 26, 2009 1:45 am ] |
| Post subject: | Re: 1.3 drover motor into 84 sierra |
yes they are the same |
|
| Author: | Bruce [ Wed Aug 26, 2009 1:46 am ] |
| Post subject: | Re: 1.3 drover motor into 84 sierra |
Yep sure will mate. Only thing is maybe you may need to change the flanges over. That's not a worry anyway.
|
|
| Author: | Bruce [ Wed Aug 26, 2009 1:47 am ] |
| Post subject: | Re: 1.3 drover motor into 84 sierra |
Dam beat me by 1 min lol
|
|
| Author: | 84zuk [ Wed Aug 26, 2009 1:55 am ] |
| Post subject: | Re: 1.3 drover motor into 84 sierra |
this might sound dumb but which flanges are you talking about?
|
|
| Author: | joeblow [ Wed Aug 26, 2009 1:55 am ] |
| Post subject: | Re: 1.3 drover motor into 84 sierra |
84zuk wrote: hi all
just wondering if a holden drover 1.3lt motor and gearbox will fit into a 1984 model sierra? cheers if it was originaly a 1.0 litre it will fit, but is not a 'bolt in' swap. |
|
| Author: | 84zuk [ Wed Aug 26, 2009 1:58 am ] |
| Post subject: | Re: 1.3 drover motor into 84 sierra |
joeblow wrote: 84zuk wrote: hi all just wondering if a holden drover 1.3lt motor and gearbox will fit into a 1984 model sierra? cheers if it was originaly a 1.0 litre it will fit, but is not a 'bolt in' swap. yep atm the zuk is a 1lt 4sp and we want to put the drover 1.3lt and 5sp gearbox into the zuk |
|
| Author: | zookster666 [ Wed Aug 26, 2009 2:00 am ] |
| Post subject: | Re: 1.3 drover motor into 84 sierra |
you will need to mod gear box and engine mounts and change the jac shaft flange on the transfer case to suit the 1.3 gear box |
|
| Author: | 84zuk [ Wed Aug 26, 2009 2:06 am ] |
| Post subject: | Re: 1.3 drover motor into 84 sierra |
i have got a complete drover and a complete sierra would it be easier for me to swap over drover complete drive train into sierra without mod's?? would this be less headache's?? cheers |
|
| Author: | 84zuk [ Wed Aug 26, 2009 2:10 am ] |
| Post subject: | Re: 1.3 drover motor into 84 sierra |
or would it be easier just to swap cabs over?? |
|
| Author: | suzukilwb [ Wed Aug 26, 2009 2:35 am ] |
| Post subject: | Re: 1.3 drover motor into 84 sierra |
i did to mine i put a 1.3l into my 1l lwb page 4 http://www.4wdaction.com.au/forum/showt ... hp?t=67261 that is what i done and it works well except the gear box but my bad |
|
| Author: | 303zuke [ Wed Aug 26, 2009 7:58 pm ] |
| Post subject: | Re: 1.3 drover motor into 84 sierra |
'84 was the changeover between the type 2 1.0lt Sierra (Metal dash with 4wd light) and the type 3 1.0lt (Plastic dash used in the N/T 1.3lt). If yours is the type 3, it will have additional holes on the chassis for the 1.3lt engine mount brackets, making the swap straingtforward. If it is a type 2, you will need to drill holes in the chassis for the 1.3 engine mount. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|