| auszookers.com https://auszookers.com/forum/ |
|
| sierra trans case into jimny https://auszookers.com/forum/viewtopic.php?f=5&t=6242 |
Page 1 of 1 |
| Author: | shep [ Wed Aug 26, 2009 2:39 pm ] |
| Post subject: | sierra trans case into jimny |
what needs to be done to a sierra trans case so that it fits into a jimny. is there a gearing advantage with a stock box? |
|
| Author: | want33s [ Wed Aug 26, 2009 3:31 pm ] |
| Post subject: | Re: sierra trans case into jimny |
I'm pretty sure I read somewhere that the Jimny Vehicle Speed Sensor (VSS) is on the output of the transfer so the first thing you'd have to do is fit one to a Sierra transfer.. The thread I read I think they used a timing belt pulley machined thinner but I can't remember where it was let alone find it... Probably on the "Other" site. 
EDIT: Spent the last hour or so looking and found the answer!!!! 
http://www.dgtuning.com/ |
|
| Author: | TASSIETOYUKI [ Wed Aug 26, 2009 4:54 pm ] |
| Post subject: | Re: sierra trans case into jimny |
Ahhem, fark thats cheep 
S0202033 D&G Tuning Complete bolt on kit € 780.45 (incl. 21% VAT) S0202041 D&G Tuning Complete bolt on kit + hand in original jackshaft € 719.95 (incl. 21% VAT) S0202042 D&G Tuning Low budget kit € 482.79 (incl. 21% VAT) |
|
| Author: | tanshi [ Wed Aug 26, 2009 4:59 pm ] |
| Post subject: | Re: sierra trans case into jimny |
i have checked with them before and they wont ship to AUS |
|
| Author: | shep [ Wed Aug 26, 2009 6:36 pm ] |
| Post subject: | Re: sierra trans case into jimny |
thanks jas. looks like it is a bit more involved then i first thought
does anyone know if there are any realistic options for better gearing. he has 235/75/15"s and is having a lot of problems in the bottomless sand that we have here. |
|
| Author: | joeblow [ Wed Aug 26, 2009 6:53 pm ] |
| Post subject: | Re: sierra trans case into jimny |
when i get a chance tonight i will post some cad pics of the sensor and tailshaft mod which at the end of the day should only cost you the price of the alloy spacer  (its that simple its not funny)
|
|
| Author: | shep [ Wed Aug 26, 2009 7:51 pm ] |
| Post subject: | Re: sierra trans case into jimny |
thanks joe. hay ball is your cnc lathe going yet 
|
|
| Author: | joeblow [ Thu Aug 27, 2009 1:41 am ] |
| Post subject: | Re: sierra trans case into jimny |
|
|
| Author: | shep [ Thu Aug 27, 2009 1:50 am ] |
| Post subject: | Re: sierra trans case into jimny |
thanks joe. 
|
|
| Author: | atari4x4 [ Thu Aug 27, 2009 1:58 am ] |
| Post subject: | Re: sierra trans case into jimny |
awesome CAD drawings! |
|
| Author: | joeblow [ Thu Aug 27, 2009 2:02 am ] |
| Post subject: | Re: sierra trans case into jimny |
thanks guys....note they are not to scale and the conversion works a treat. the first one i did donkeys years ago the guys from GRP were trying to figure out how easy i had done it............but my mate parked it on a mound
|
|
| Author: | shep [ Thu Aug 27, 2009 2:22 am ] |
| Post subject: | Re: sierra trans case into jimny |
is there a gearing difference between a jimny case and a stock 1.3 sierra case? |
|
| Author: | jimbo_jones [ Thu Aug 27, 2009 2:38 am ] |
| Post subject: | Re: sierra trans case into jimny |
shep wrote: is there a gearing difference between a jimny case and a stock 1.3 sierra case?
dosent matter you can get a wider range of after market gears for the leafy |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|