31zook wrote:
yeah i thought that 1L were 5%
nope. there is 5% diferance between 1.3 wt and nt diff ratio's
| auszookers.com https://auszookers.com/forum/ |
|
| Which Transfer case? https://auszookers.com/forum/viewtopic.php?f=5&t=6279 |
Page 1 of 1 |
| Author: | jamesandlara [ Fri Aug 28, 2009 6:31 pm ] |
| Post subject: | Which Transfer case? |
Which is the best transfer case for crawling? I have a 1l and a 1.3l. I notice that a lot of sierras are advertised with a 1l case. |
|
| Author: | shep [ Fri Aug 28, 2009 6:50 pm ] |
| Post subject: | Re: Which Transfer case? |
a 1ltr case is 12% lower then a 1.3 case. |
|
| Author: | 31zook [ Fri Aug 28, 2009 6:54 pm ] |
| Post subject: | Re: Which Transfer case? |
yeah i thought that 1L were 5% |
|
| Author: | shep [ Fri Aug 28, 2009 6:56 pm ] |
| Post subject: | Re: Which Transfer case? |
31zook wrote: yeah i thought that 1L were 5%
nope. there is 5% diferance between 1.3 wt and nt diff ratio's
|
|
| Author: | 31zook [ Fri Aug 28, 2009 8:37 pm ] |
| Post subject: | Re: Which Transfer case? |
oh very noice... ill add that to my collection of stuff i know... cheers |
|
| Author: | hardknocks [ Sat Aug 29, 2009 9:25 pm ] |
| Post subject: | Re: Which Transfer case? |
I would love to add one of those transfer cases to my collection 
Forget the 5% ? Just get reduction gears ! Question ? Do you have to get a 1 litre transfer machined , like the 1.3 ? To fit in reduction gears . If not I'll take the 1 litre
But seriously if yourve got the cash gears!!!! |
|
| Author: | foolsp33d [ Sun Aug 30, 2009 12:51 am ] |
| Post subject: | Re: Which Transfer case? |
ok 1 litre xfer is the alternative(cheap) way of goin about gears rather than spending big on aftermarket gears.There are two types of cases.. one with a switch and one without... Aftermarket gears WILL NOT fit into a 1litre xfer if it does not have a shift switch..only a 1.3(and not a coily case) even still machining MAY neede to be done... The swap(1.3-1litre) is pretty stragiht forward, just a matter of possibly changing a mounting arm and swapping over the flanges/uni to what works. (There is a slight difference between the WT and the NT uni hence the need to swap.) (im open to correction if there is anyone who disagree's or knows otherwise, personally if I was contemplating this, id go diff gears over xfer) correction done ta shep 
|
|
| Author: | shep [ Sun Aug 30, 2009 1:03 am ] |
| Post subject: | Re: Which Transfer case? |
trans gears will fit in a 1ltr case as long as it has the 4x4 switch. |
|
| Author: | suzukilwb [ Sun Aug 30, 2009 6:28 pm ] |
| Post subject: | Re: Which Transfer case? |
what do you mean by switch |
|
| Author: | shep [ Sun Aug 30, 2009 6:29 pm ] |
| Post subject: | Re: Which Transfer case? |
if it has wires hanging out of the box it is the right one. |
|
| Author: | suzukilwb [ Sun Aug 30, 2009 6:30 pm ] |
| Post subject: | Re: Which Transfer case? |
i got them they go to my light |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|