seen wrote:
who cares how it is spelt u still got wat i mean
OOOooooo!!!!
| auszookers.com https://auszookers.com/forum/ |
|
| 1.3 motor https://auszookers.com/forum/viewtopic.php?f=5&t=6353 |
Page 1 of 1 |
| Author: | seen [ Tue Sep 01, 2009 12:46 am ] |
| Post subject: | 1.3 motor |
hey guys my engine is on its wat out in my seirra 1.3 i am wonderin should i rebuild the 1.3 biger n better with a bigger cam n stuff and does working the motor require a blue plate bcoz thats my problem because i am on my P's |
|
| Author: | Scrawny [ Tue Sep 01, 2009 1:14 am ] |
| Post subject: | Re: 1.3 motor |
Shouldn't affect blue plates as it's not really changing anything. If you want to go down the re-building route it will cost dollars but probably worth it in my opinion, especially since you are on P's. |
|
| Author: | seen [ Tue Sep 01, 2009 10:03 pm ] |
| Post subject: | Re: 1.3 motor |
wat would be the best things to do to get a bit more power |
|
| Author: | steak_knife [ Tue Sep 01, 2009 10:08 pm ] |
| Post subject: | Re: 1.3 motor |
Cam, carby & match port, extractors ! drive |
|
| Author: | seen [ Tue Sep 08, 2009 12:16 am ] |
| Post subject: | Re: 1.3 motor |
should i bore the engine n to wat size |
|
| Author: | DMAC [ Tue Sep 08, 2009 12:35 am ] |
| Post subject: | Re: 1.3 motor |
steknig wrote: Cam, carby & match port, extractors ! drive
If you go the cam. Should you buy new rocker arms or can you use the origianal ones? |
|
| Author: | steak_knife [ Tue Sep 08, 2009 1:14 am ] |
| Post subject: | Re: 1.3 motor |
DMAC wrote: steknig wrote: Cam, carby & match port, extractors ! drive If you go the cam. Should you buy new rocker arms or can you use the origianal ones? If it was me in my eng, i`d have them refaced at the same place & time as the cam grind, but that just me. If thay are not worn you can use them again, but is it worth the risk of a cam? Steve |
|
| Author: | Rockhopper [ Tue Sep 08, 2009 11:09 am ] |
| Post subject: | Re: 1.3 motor |
steknig wrote: DMAC wrote: steknig wrote: Cam, carby & match port, extractors ! drive If you go the cam. Should you buy new rocker arms or can you use the origianal ones? If it was me in my eng, i`d have them refaced at the same place & time as the cam grind, but that just me. If thay are not worn you can use them again, but is it worth the risk of a cam? Steve x2. You might save a few dollars initially not doing the rocker arms as well as the cam, but you'll find the cam will probably chew out in time. |
|
| Author: | TASSIETOYUKI [ Tue Sep 08, 2009 12:56 pm ] |
| Post subject: | Re: 1.3 motor |
And "wat" is spelt WHAT. it is one push of a key, not that bloody hard.... |
|
| Author: | seen [ Tue Sep 08, 2009 8:22 pm ] |
| Post subject: | Re: 1.3 motor |
i am geting the parts from lowrange offroad who cares how it is spelt u still got wat i mean |
|
| Author: | steak_knife [ Tue Sep 08, 2009 8:24 pm ] |
| Post subject: | Re: 1.3 motor |
seen wrote: who cares how it is spelt u still got wat i mean
OOOooooo!!!!
|
|
| Author: | TASSIETOYUKI [ Tue Sep 08, 2009 9:31 pm ] |
| Post subject: | Re: 1.3 motor |
You have a keyboard. Don't be lazy please use it... we are not using "sms" now are we. If you do not have the time to use the 90 plus buttons on your computers keyboard, you do not really have the time to be on this forum do you.. 
|
|
| Author: | steak_knife [ Tue Sep 08, 2009 9:33 pm ] |
| Post subject: | Re: 1.3 motor |
I`ve got spell check, don`t work on non grammar do . |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|