Small piece of black electrical tape across the dash usually fixes it
As Joe suggested, look for damaged/loose vacuum lines or blocked actuator
| auszookers.com https://auszookers.com/forum/ |
|
| Flashing 4WD light in Jimny https://auszookers.com/forum/viewtopic.php?f=5&t=6364 |
Page 1 of 1 |
| Author: | zukenutter [ Tue Sep 01, 2009 7:26 pm ] |
| Post subject: | Flashing 4WD light in Jimny |
4WD light on dash flashing when 4WD is engaged on a Jimny. Anybody have any ideas. It's not a loose connection flicker, more like a regular, constant flash. |
|
| Author: | joeblow [ Tue Sep 01, 2009 7:28 pm ] |
| Post subject: | Re: Flashing 4WD light in Jimny |
is the filter on the actuator bloked, and is the vac line still attached? |
|
| Author: | zukenutter [ Tue Sep 01, 2009 7:42 pm ] |
| Post subject: | Re: Flashing 4WD light in Jimny |
It's another Jimny owner who's yet to join AusZookers, so at the moment I only have basic info. His 4WD activation is working fine apparently. My first suggestion was loose connection, but he reckons it's a regular warning type flash |
|
| Author: | Scrawny [ Tue Sep 01, 2009 7:47 pm ] |
| Post subject: | Re: Flashing 4WD light in Jimny |
Small piece of black electrical tape across the dash usually fixes it
As Joe suggested, look for damaged/loose vacuum lines or blocked actuator |
|
| Author: | shep [ Tue Sep 01, 2009 7:50 pm ] |
| Post subject: | Re: Flashing 4WD light in Jimny |
ScrawnC wrote: Small piece of black electrical tape across the dash usually fixes it
thats how i fixed it in my bitsamissen only problem is that now low range is a bit hit and miss. |
|
| Author: | zukenutter [ Tue Sep 01, 2009 7:53 pm ] |
| Post subject: | Re: Flashing 4WD light in Jimny |
joeblow wrote: is the filter on the actuator bloked, and is the vac line still attached?
i'll pass this on and see what he says |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|