31zook wrote:
i would hit it with a hammer and see what happens...
and you think i'm dodgy with my work
| auszookers.com https://auszookers.com/forum/ |
|
| sierra front wheel stud replacement? https://auszookers.com/forum/viewtopic.php?f=5&t=6419 |
Page 1 of 1 |
| Author: | zookster666 [ Fri Sep 04, 2009 1:03 am ] |
| Post subject: | sierra front wheel stud replacement? |
can these be changed? and what is involved? as mine are damaged i need to fix it |
|
| Author: | steak_knife [ Fri Sep 04, 2009 1:09 am ] |
| Post subject: | Re: sierra front wheel stud replacement? |
Hammer the old ones out & the new one`s in! Can get aftermarket from repco or superdump. |
|
| Author: | zookster666 [ Fri Sep 04, 2009 1:17 am ] |
| Post subject: | Re: sierra front wheel stud replacement? |
i thought front ones would have screwed in i cant remember what it all looks like at the moment though |
|
| Author: | 31zook [ Fri Sep 04, 2009 1:22 am ] |
| Post subject: | Re: sierra front wheel stud replacement? |
i would hit it with a hammer and see what happens... |
|
| Author: | zookster666 [ Fri Sep 04, 2009 1:24 am ] |
| Post subject: | Re: sierra front wheel stud replacement? |
will give it a go thanks guys |
|
| Author: | dank [ Fri Sep 04, 2009 1:35 am ] |
| Post subject: | Re: sierra front wheel stud replacement? |
go the hammer smash. They are pressed in. I have replaced some on mine... |
|
| Author: | steak_knife [ Fri Sep 04, 2009 1:42 am ] |
| Post subject: | Re: sierra front wheel stud replacement? |
I`ve replaced hundreds of the little buggers. I like hammers. |
|
| Author: | Brett [ Fri Sep 04, 2009 1:49 am ] |
| Post subject: | Re: sierra front wheel stud replacement? |
31zook wrote: i would hit it with a hammer and see what happens...
and you think i'm dodgy with my work
|
|
| Author: | steak_knife [ Fri Sep 04, 2009 2:08 am ] |
| Post subject: | Re: sierra front wheel stud replacement? |
Brett wrote: 31zook wrote: i would hit it with a hammer and see what happens... and you think i'm dodgy with my work What do you do?? |
|
| Author: | Brett [ Fri Sep 04, 2009 2:16 am ] |
| Post subject: | Re: sierra front wheel stud replacement? |
tub the guards with a 4inch grinder and prep my wheels for paint with a wire wheel. at least i know its going to turn out bad
|
|
| Author: | steak_knife [ Fri Sep 04, 2009 2:18 am ] |
| Post subject: | Re: sierra front wheel stud replacement? |
Just gunna get dirty, i`ve striped paint with a oxy kit |
|
| Author: | Rockhopper [ Fri Sep 04, 2009 11:01 am ] |
| Post subject: | Re: sierra front wheel stud replacement? |
hit em out with a hammer, and when you put them back in, put them throuh the hub,put a wheel nut on back to front and rattle gun it till it pulls the stud in |
|
| Author: | jamesandlara [ Fri Sep 04, 2009 1:47 pm ] |
| Post subject: | Re: sierra front wheel stud replacement? |
A good motto: When in doubt, use a bigger hammer. Failing that, read the instructions. (but only in extreme situations) |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|