| auszookers.com https://auszookers.com/forum/ |
|
| What diff Ratio is this https://auszookers.com/forum/viewtopic.php?f=5&t=6425 |
Page 1 of 1 |
| Author: | chadd1981 [ Fri Sep 04, 2009 3:28 pm ] |
| Post subject: | What diff Ratio is this |
I have a spare NT rear diff at home and i pulled the centre out of it to see what the ratio was. I counted 41 teeth on the crown wheel and 9 teeth on the pinion. Therefore the Ratio would be 4.56. Is this correct?? 
I didn't think that you could get 4.56 ratio's for the Suzuki??
|
|
| Author: | shep [ Fri Sep 04, 2009 3:32 pm ] |
| Post subject: | Re: What diff Ratio is this |
did ya check your counting? |
|
| Author: | chadd1981 [ Fri Sep 04, 2009 3:35 pm ] |
| Post subject: | Re: What diff Ratio is this |
i counted it twice cause i didn't think that it was correct. |
|
| Author: | Damo [ Fri Sep 04, 2009 4:04 pm ] |
| Post subject: | Re: What diff Ratio is this |
I'm pretty sure some model Vitaras came with that ratio. Someone that has a bit more Vit knowledge will chime in hopefully. |
|
| Author: | royce [ Fri Sep 04, 2009 5:24 pm ] |
| Post subject: | Re: What diff Ratio is this |
1.3 or 1 litre size? could be bits from a vit or an LJ80 |
|
| Author: | chadd1981 [ Fri Sep 04, 2009 5:46 pm ] |
| Post subject: | Re: What diff Ratio is this |
royce wrote: 1.3 or 1 litre size?
could be bits from a vit or an LJ80 I think that they are 1 litre. I got a complete set of diffs when i bought the ute and this is just one of the spare diffs that i have pulled apart to keep as spares. They are either out of a ute or hardtop (both NT) |
|
| Author: | appsie [ Fri Sep 04, 2009 8:05 pm ] |
| Post subject: | Re: What diff Ratio is this |
wasnt that around the ratio that some vitaras had??the autos i believe??do you have a 1 ltr centre there to compare for size matt |
|
| Author: | 303zuke [ Mon Sep 07, 2009 12:33 am ] |
| Post subject: | Re: What diff Ratio is this |
If it's a 1 litre size, LJ80s came with 4.56 diffs. If it a 1.3 size, early Vits with an Auto box have 4.625 diffs. If you're running 1 litre axle housings, your other options for R&P ratios are 4.875 from an LJ50 or 5.125 from a Super Carry. |
|
| Author: | WorldbyJimny [ Mon Sep 07, 2009 7:49 pm ] |
| Post subject: | Re: What diff Ratio is this |
Its LJ80 ratio. |
|
| Author: | chadd1981 [ Mon Sep 07, 2009 7:53 pm ] |
| Post subject: | Re: What diff Ratio is this |
This is unusual that it is in a NT housing?? Does anyone want it?? it needs to be rebuilt as the bearings are all stuffed. I wil check the spare front and see if i have a matching pair for anyone interested. |
|
| Author: | WorldbyJimny [ Tue Sep 08, 2009 10:17 am ] |
| Post subject: | Re: What diff Ratio is this |
Its a common way to lower gearing in a 1.0L diff. You can also use LJ50 which is 4.8. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|