| auszookers.com https://auszookers.com/forum/ |
|
| Carby Help https://auszookers.com/forum/viewtopic.php?f=5&t=6478 |
Page 1 of 1 |
| Author: | Rusho [ Mon Sep 07, 2009 3:33 pm ] |
| Post subject: | Carby Help |
Hi all, Carby problem.....This is a carry on problem from doing my head gasket on the weekend. New fuel pump is in. Engine runs well, very smooth no misses etc. Try to drive and its a different story. While ideling engine revs to about 1500-2000 then flattens out and dies??? HELP!!!! Cheers Rusho |
|
| Author: | Taff [ Mon Sep 07, 2009 3:47 pm ] |
| Post subject: | Re: Carby Help |
Check your vacuum advance is hooked up correctly. |
|
| Author: | ninjadaniel [ Mon Sep 07, 2009 4:28 pm ] |
| Post subject: | Re: Carby Help |
On your carbie there are 2 8mmish pipes for coolant, check to see that these pipes aren't blocked by dirt/rust. |
|
| Author: | steak_knife [ Mon Sep 07, 2009 10:40 pm ] |
| Post subject: | Re: Carby Help |
check the cam timing again, 1 notch will do that to. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|