| auszookers.com https://auszookers.com/forum/ |
|
| 1l carby problems https://auszookers.com/forum/viewtopic.php?f=5&t=6492 |
Page 1 of 1 |
| Author: | chadd1981 [ Mon Sep 07, 2009 11:01 pm ] |
| Post subject: | 1l carby problems |
Ok, Got my first zook 1L motor its been sitting for ages. Any way put a new needle and seat in it last week ples a few gaskets and cant get the bloddy thing to go right. I set the float level at 45mm after finding a bit on here for the specs. It just pisses fuel out the front of the carby flooding. tried lowering it a bitI.E 50mm runs wont rev at all then stalls like no fuel. Any ideas??? cheers |
|
| Author: | steak_knife [ Mon Sep 07, 2009 11:45 pm ] |
| Post subject: | Re: 1l carby problems |
5mm is a lot in a float adjustment, try 46mm ect. Steve |
|
| Author: | chadd1981 [ Tue Sep 08, 2009 12:23 am ] |
| Post subject: | Re: 1l carby problems |
I have tried all aroun these sizes for about 4 hours now. I was jsut giving 50 as an example. some hone told me the jets may be blocked any ideas?? Pic ect on how to claen these? |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|