that looks like a good idea but ill go without it for now.You shouldnt of put the lowrange link up,now i want to spend money again
Ordered my rear brake shoes and seals etc today.$26 seal at one place,$7 at another
| auszookers.com https://auszookers.com/forum/ |
|
| rear axle seal https://auszookers.com/forum/viewtopic.php?f=5&t=6627 |
Page 1 of 1 |
| Author: | appsie [ Mon Sep 14, 2009 3:16 am ] |
| Post subject: | rear axle seal |
hey all have got a rear axle seal problem im guessing?? i have oil dripping out of the housing and into my brakes.My brake shoes on the rear are pretty worn tho so im replacing them anyways,drum seems in good condition still.also rear wheel bearing seems fine so is the seal what im chasing and any tips as ive never done one....thanks does anyone have a part number? |
|
| Author: | lump_a_charcoal [ Mon Sep 14, 2009 11:06 am ] |
| Post subject: | Re: rear axle seal |
Definately the seal... Any parts place should have them. You will need to remove the backing plate to remove the axle, so oyu will need to bleed the brakes afterwards... Buy a bottle of brake fluid while you are out. There is nothing too tricky, just take your time. |
|
| Author: | appsie [ Mon Sep 14, 2009 12:08 pm ] |
| Post subject: | Re: rear axle seal |
yeah sweet as,bleeding brakes is the worse part haha.thanks mate |
|
| Author: | lump_a_charcoal [ Mon Sep 14, 2009 12:28 pm ] |
| Post subject: | Re: rear axle seal |
While you are in there, you can mod the backing plates and install some of the SJ410 Backing Plates on this page - http://www.lowrangeoffroad.com/samaxles.htm That way you can remove axles without having to bleed your brakes. |
|
| Author: | jdk81 [ Mon Sep 14, 2009 2:51 pm ] |
| Post subject: | Re: rear axle seal |
lump_a_charcoal wrote: While you are in there, you can mod the backing plates and install some of the SJ410 Backing Plates on this page - http://www.lowrangeoffroad.com/samaxles.htm
That way you can remove axles without having to bleed your brakes. I wish I had put those in when i replaced the bearings and seals. |
|
| Author: | appsie [ Mon Sep 14, 2009 11:22 pm ] |
| Post subject: | Re: rear axle seal |
that looks like a good idea but ill go without it for now.You shouldnt of put the lowrange link up,now i want to spend money again
Ordered my rear brake shoes and seals etc today.$26 seal at one place,$7 at another
|
|
| Author: | foolsp33d [ Tue Sep 15, 2009 1:30 am ] |
| Post subject: | Re: rear axle seal |
search for rear wheel bearing replacement will give pics and a run down as to the install 
Im pretty sure i included part numbers as well.... |
|
| Author: | weaves [ Tue Sep 15, 2009 2:01 am ] |
| Post subject: | Re: rear axle seal |
appsie wrote: that looks like a good idea but ill go without it for now.You shouldnt of put the lowrange link up,now i want to spend money again
Ordered my rear brake shoes and seals etc today.$26 seal at one place,$7 at another fark $26 for a seal that costs <$1.00 thats robbery $7.00 bux sounds fair, and there will be little to no difference in quality between brands weaves |
|
| Author: | appsie [ Sat Sep 19, 2009 10:58 pm ] |
| Post subject: | Re: rear axle seal |
got seals in the end for 3.00 each at a different place lol |
|
| Author: | squirezook [ Sun Sep 20, 2009 5:48 pm ] |
| Post subject: | Re: rear axle seal |
$2.85 at a bearing place on Lynton rd near Cannon Hill
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|